Engine Oil Pressure Gauge Tester Detector Tools Kit - maXpeedingrods

The gauge measures oil pressure from 0 to 10 bar, which is equivalent to 0 to 140 psi.

The kit includes 10 oil switch port adaptors with various thread sizes: M10x1, M12x1.5, M14x1.5, M16x1.5, and M18x1.5.

The included hose is 1200mm, approximately 4 feet long.

No, the color of the carry case is random and cannot be pre-selected.

This kit is used to test oil pump pressure, diagnose issues with low oil warning devices, identify worn oil pumps and engines, and detect faulty oil pressure switches.

Yes, a 90-degree coupling adapter is included to help reach difficult or angled ports.

The product comes with a one-year warranty covering any manufacturing defects.

Ensure the adaptor is correctly and securely threaded into the engine port. Verify the hose connections are tight. Check if the engine is running and at a sufficient RPM for oil pressure to build. Confirm the correct adaptor is being used for the specific port.

Tighten the hose connection to the adaptor and gauge. If the leak persists, check the seals or O-rings (if applicable) for damage or wear. Ensure the adaptor is fully seated in the engine port.

This could indicate an issue with the engine's oil pump, a partially blocked oil passage, or a faulty oil pressure switch. Further engine diagnosis may be required. Ensure the gauge itself is not damaged.

Double-check the thread size of the port and compare it with the available adaptors. Consult your vehicle's service manual for the correct thread specification. The kit includes common sizes, but rare applications might require a different adaptor.