Soho Lighting Antique Brass 3 Gang Switch Double Plate 2 Way Screwless - Size: H 86mm X W 146mm

A 2-way switch system allows a light or group of lights to be controlled from two different locations. For example, you can turn a light on or off from both the top and bottom of a staircase.

The plate dimensions are Height 86mm X Width 146mm.

Yes, while it offers 3 gangs and 2-way switching capability, you can use one or more of the gangs for simple 1-way switching of single lights if desired.

The screwless design uses a clip-on mechanism where the decorative plate snaps over the switch module/grid, hiding the mounting screws for a cleaner look.

The plate and the switch modules are typically provided separately, allowing installers to choose the exact configuration and type of switches needed.

This switch is designed for standard mains voltage lighting circuits and is compatible with most common bulb types, including LED, incandescent, and halogen, provided they do not exceed the circuit's wattage limits.

Use a soft, dry cloth for routine cleaning. For tougher marks, a slightly damp cloth can be used, followed immediately by drying. Avoid abrasive cleaners.

Ensure the circuit breaker is on. Verify wiring connections are secure. If using 2-way switching, check the wiring at both switch locations.

Confirm the underlying electrical box is correctly installed and flush with the wall. Ensure no wires are obstructing the plate's seating. Check that the correct size plate (double) is being used.

Check all wire connections for tightness. This could indicate a loose connection or a fault with the bulb or fixture itself.

Verify that the intermediate wiring between the two 2-way switches is correctly connected according to the wiring diagram. Check the connections at both switch points.