Best current price£13.53from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£13.53Visit shop Loctite All Purpose Extra Strong Adhesive 20Ml (3 Pack) - Extra Strong Clear Adhesive For Crafts, Fabric, Wood, Plastic & More
Visit shop1 offer from £13.53
View price history by clicking the chart icon.
The Loctite All Purpose Extra Strong Adhesive 3-Pack is designed for DIY enthusiasts, crafters, and homeowners needing a reliable, clear adhesive for a variety of materials including crafts, fabric, wood, and plastic. Its key benefit is providing a fast-drying, extra-strong, and nearly invisible bond for quick and durable repairs and projects. A potential caveat is its strength; it is not recommended for flexible plastics or materials that require a flexible bond.
| Colour | White |
|---|---|
| Brand | Loctite |
This adhesive is suitable for crafts, fabric (non-stretch), wood, plastic (most types), paper, cardboard, metal, ceramic, and leather. Always test on an inconspicuous area first, especially with plastics.
Avoid using on polyethylene, polypropylene, PTFE, silicone rubber, Styrofoam®, flexible plastics, or materials that will be frequently exposed to water or extreme heat.
The adhesive sets quickly, typically within 30-60 seconds, but it requires 24 hours to reach its maximum bond strength.
Yes, once fully cured, the bond is permanent and very strong. It is not designed for temporary adhesion.
Store the tubes in a cool, dry place away from direct sunlight and extreme temperatures, with the cap tightly sealed.
Yes, it's suitable for non-stretch fabrics, like repairing a hem or a seam. It is not recommended for stretchy or elastic materials.
Each tube contains 20ml of adhesive.
Ensure the nozzle seal has been fully punctured. Check if the adhesive has dried inside the nozzle; if so, carefully clear the obstruction or use a new tube.
Verify surfaces were clean and dry before application. Ensure sufficient pressure was applied during bonding. Confirm the materials are compatible with the adhesive. The bond may need 24 hours to reach full strength.
Ensure surfaces are properly aligned and held in place. Avoid applying too thick a layer, as this can inhibit rapid curing. Check storage conditions; extreme cold can slow drying.
Wipe away excess uncured adhesive immediately with a damp cloth. For cured adhesive, carefully try to scrape it away or use a solvent suitable for the surface and the adhesive (test in an inconspicuous area first).
Setup:
Compatibility:
Care & Storage:
