Best current price£9.79from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£9.79Visit shop Timco Sds25450 Sds Plus Hammer Bit 25.0 X 450 Clip 1
Visit shop
B&Q£11.04Visit shop B&Q - TimcoSds Plus Hammer Bit (Size 25.0 X 4501 Each)
Visit shop4 offers from £9.79 - £15.50
View price history by clicking the chart icon.
The TIMco SDS Plus Hammer Bit is an essential tool for professional contractors and serious DIY enthusiasts who require reliable, heavy-duty masonry drilling. It offers excellent durability and resistance to deformation thanks to its full heat treatment, making it ideal for high-impact tasks. However, users should note that the large 25.0mm diameter requires a powerful rotary hammer with sufficient torque to achieve optimal results without overheating the tool.
| Model Part Number | PTDTIMSDS25450 |
|---|---|
| Brand | TIMco |
No, this bit is designed exclusively for rotary hammers with an SDS Plus chuck system.
The bit has a total length of 450mm, with a usable working length of 400mm.
No, this is a masonry bit specifically engineered for concrete, brick, and stone.
The bit is finished with a shot blast coating for rust protection; keep it dry and store it in a tool case when not in use.
The shank diameter is 10.0mm, conforming to the industry standard for SDS Plus bits.
Ensure the SDS Plus chuck is fully retracted before inserting the bit and check that the shank is free of heavy debris.
Verify that the drill is centered and that the bit is not damaged; reduce feed pressure if the drill struggles.
Clear the hole of dust more frequently and ensure you are not applying too much downward force.
To set up, insert the shank directly into your rotary hammer chuck until it clicks into the locking position. Ensure the hammer is set to the 'hammer drill' mode. The bit is fully compatible with any rotary hammer featuring a standard SDS Plus tool system. For maintenance, clean the flutes after every use to remove debris, and store the bit in a dry area to preserve the shot blast finish. If the bit becomes hot during extended use, allow it to air cool before storage or handling.
