Best current price£33.62from Demon Tweeks
Shopping.co.uk recommended and popular offers
Demon Tweeks£33.62Visit shop Design Engineering ATAC Advanced Thermal Acoustic Coating Spray On - Silver, Silver
Visit shop3 offers from £33.62
View price history by clicking the chart icon.
This Design Engineering ATAC spray-on coating is for automotive enthusiasts and DIYers looking to improve their vehicle's interior comfort by reducing heat and noise. Its key benefit is the dual action of reflecting extreme heat and dampening sound with its advanced ceramic sphere technology. A caveat is that it's intended for application on unfinished automotive interiors only. This aerosol product provides a practical solution for managing thermal and acoustic challenges within a car's cabin, offering a cooler and quieter driving experience.
| Model Part Number | 50211 |
|---|---|
| Brand | Design Engineering |
No, this product is designed specifically for application on *unfinished* automotive interior surfaces. It is not recommended for use on painted, carpeted, or upholstered areas.
Drying times can vary based on temperature and humidity. Typically, it requires adequate time for each coat to become dry to the touch before recoating, with a full cure taking several hours.
Coverage varies depending on the application thickness and the surface area being treated. For best results, apply thin, even coats.
No, this product is formulated for interior automotive applications only and is not suitable for exterior use.
The advanced ceramic sphere technology is engineered to reflect heat up to 375°F, providing significant thermal protection within typical automotive interior conditions.
The coating becomes durable once cured. While water-soluble during application for cleanup, it forms a lasting barrier once dried and bonded to the surface.
Apply in thin, even coats. Multiple thin coats are more effective for both thermal and acoustic performance than a single heavy application.
Ensure the can is thoroughly shaken and held upright. If the nozzle is clogged, carefully clean it with a fine needle or replace the can.
Apply additional thin, even coats. Ensure the surface was properly prepared and that the spray was applied from the recommended distance.
Ensure cleanup is performed while the coating is still wet. Once cured, water cleanup becomes less effective.
Ensure adequate ventilation in the workspace. The odor is typically temporary and dissipates as the coating dries.
Setup:
Compatibility:
Care:
