Best current price£189.00from eBay
Shopping.co.uk recommended and popular offers
eBay£189.00Visit shop EDGE EDP122SPL-E3 - 12"" 30cm 3000 Watts Dual 2 Ohm SPL Car Bass Subwoofer
Visit shop1 offer from £189.00
View price history by clicking the chart icon.
This EDGE Audio 12" Competition Subwoofer is designed for serious car audio enthusiasts seeking extreme bass output for competitive sound systems. Its key benefit is the immense power handling (1500 Watts RMS / 3000 Watts Max) and robust construction for deep, impactful lows. A potential caveat is its requirement for a properly tuned enclosure and sufficient amplification to perform optimally, making it less plug-and-play than standard woofers.
| Model Part Number | EDP122SPL-E3 |
|---|---|
| Brand | Edge |
The optimal enclosure volume depends on whether you choose a sealed or ported design. Consult the product manual or manufacturer's website for specific recommended dimensions and tuning frequencies, as these are critical for achieving the best performance.
While you can technically connect a lower-powered amplifier, it is not recommended. To prevent potential damage from underpowering (which can cause distortion and heat buildup) and to achieve the subwoofer's designed performance, an amplifier delivering close to its 1500W RMS rating is advised.
You can wire them in series to create a 4-ohm load, or in parallel to create a 2-ohm load. Wiring in parallel generally provides more power from amplifiers that support lower impedances.
The RMS power rating is 1500 Watts. This indicates the continuous power the subwoofer can handle reliably over extended periods.
RMS (Root Mean Square) power is the continuous, usable power the subwoofer can handle. Max power (or Peak power) is the maximum power the subwoofer can withstand for short bursts. Always match your amplifier's RMS output to the subwoofer's RMS rating for optimal and safe operation.
Yes, a break-in period is recommended for most high-performance subwoofers. Playing music at moderate volumes for several hours allows the suspension (surround and spider) to become more flexible, which can improve excursion and overall sound quality.
Check all wiring connections from the amplifier to the subwoofer, ensuring they are secure and correctly wired (series or parallel as intended). Verify the amplifier is receiving power and is not in protection mode. Test the amplifier with a different speaker to rule out amplifier failure.
Reduce amplifier gain. Check for clipping by ensuring the amplifier's input signal is clean. Inspect the voice coil for any physical damage or obstruction. Ensure the enclosure is properly sealed and not leaking air, which can cause port noise or distortion.
Verify the enclosure is correctly sized and tuned for the subwoofer. Ensure the amplifier is providing sufficient power (RMS) at the correct impedance. Check for air leaks in the enclosure. Confirm the subwoofer's polarity is correct in relation to other speakers in the system.
Inspect the subwoofer cone and surround for any foreign objects. Check that the mounting screws are tight and that the enclosure itself is not rattling due to loose panels or bracing. Ensure the voice coil is not rubbing against the magnet structure (this may indicate damage).
Enclosure Requirements: The EDGE Audio 12" Competition Subwoofer requires a specifically designed enclosure. For optimal performance, consult the manufacturer's recommendations or use enclosure design software. Common types include ported (vented) boxes for higher output or sealed boxes for tighter, more controlled bass. Ensure the enclosure is constructed from durable materials like MDF (Medium-Density Fiberboard) and is well-braced to prevent resonance.
Amplifier Compatibility: Due to its high power handling (1500W RMS), a compatible amplifier is crucial. A monoblock amplifier rated at or above 1500W RMS at 2 ohms (or 1 ohm if wiring the dual coils in parallel) is recommended. Ensure the amplifier's power delivery is clean and stable to avoid damaging the subwoofer.
Wiring: The dual 2-ohm voice coils offer flexibility. You can wire them in series to achieve a 4-ohm load, or in parallel to achieve a 2-ohm load, depending on your amplifier's capabilities and desired impedance.
Installation: Mount the subwoofer securely in the enclosure. Ensure all connections are tight and properly insulated. Use appropriate gauge speaker wire. Vibration damping material on the vehicle's mounting surface can help reduce rattles.
Care: Keep the subwoofer cone and surround clean and free from dust and debris. Use a soft brush or compressed air for cleaning. Avoid exposing the subwoofer to excessive moisture or extreme temperatures. Regularly check all connections for tightness.
