FloPlast 110mm Industrial/Xtraflo Downpipe Kit - Swan Neck - Grey

This kit is specifically designed for the FloPlast XtraFlo 170mm industrial system and may not be compatible with standard 112mm domestic guttering components.

No, this is a push-fit system. Solvent weld is not required and should not be used as it prevents necessary movement for thermal expansion.

Using `SL40` silicone spray prevents the rubber ring seals from snagging or rolling, ensuring a smooth, watertight connection.

Yes, you can cut the pipe using a fine-toothed hacksaw; ensure you deburr the edge with a file afterward to prevent damage to the seals.

The swan neck offsets the downpipe so it can sit flush against the wall even when the roofline/fascia extends outward.

The kit includes 6 pipe clips to ensure sufficient support for the two 3-meter pipe lengths provided.

Check that the ring seal is properly seated in the groove and ensure the pipe end was lubricated with silicone spray during insertion.

Ensure you are using the correct 110mm bracket size and that the screw fixings into the masonry wall are secure.

Ensure the pipe end is cut square and deburred; use additional silicone spray if the seal is resisting insertion.