Eventide Misha - Instrument & Sequencer Module

An interval-based sequencer generates melodies by focusing on the distance (interval) between successive notes, rather than a fixed sequence of absolute pitches. This method, inspired by serial music, allows for unique melodic generation and can lead to unexpected musical results.

Yes, Misha can function as both a sequencer and an instrument. It has an internal oscillator with an audio output, allowing it to generate sound directly. You can play it live or use its sequencing capabilities to control other sound sources.

Custom scales can be loaded via a Micro-SD card. Ensure your scales are in the Scala (.scl) format and placed in the appropriate directory on the card. Misha supports up to 100 user scales.

Misha provides three independent pairs of Control Voltage (CV) and Gate outputs. This allows it to control up to three different Eurorack modules simultaneously with pitch and gate information.

While Misha's core is monophonic for its internal oscillator and primary sequencing, its three independent CV/Gate outputs can be used to trigger and control multiple voices or modules simultaneously, offering a form of limited polyphony or multi-timbral sequencing.

Firmware updates are performed using the Micro-USB port on the module. Connect Misha to your computer and use Eventide's Device Manager software to download and install the latest firmware.

Yes, Misha has a dedicated clock input for synchronizing with external sequencers or drum machines. It also offers MIDI clock output for syncing external MIDI devices.

Ensure the ribbon cable is securely connected to both the module and the Eurorack power supply, verifying the red stripe on the cable aligns with the -12V rail on both connectors. Check that the Eurorack case's power supply is active and functional.

Confirm that the audio output cable is properly connected to your mixer or audio interface. Check the Misha's internal oscillator is enabled and its level is set appropriately. Verify that no external controls are muting the output.

Check the selected key and scale settings. Ensure the clock source (internal or external) is correctly configured and providing a signal. Verify that the PPQ settings are appropriate for the desired rhythmic resolution.

Ensure the MIDI output is correctly wired to your external device. Check that the MIDI channel settings on both Misha and the receiving device are matched. Verify that MIDI is enabled in the module's settings.

Make sure the scale files are in the correct format (.scl) and placed on the Micro-SD card in the designated folder. Ensure the Micro-SD card is properly formatted (FAT32) and inserted correctly.