Autotek Aerosol Spray Paint - Red - 300ml
Best current price£12.99from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£12.99Visit shop Autotek Peugeot Cherry Fast Drying Aerosol Spray Paint 300ml
Visit shopeBay£12.99Visit shop All Offers
4 offers from £12.99 - £13.99
View price history by clicking the chart icon.
eBayAutotek Peugeot Cherry Fast Drying Aerosol Spray Paint 300ml
Free delivery in 1–3 days
£12.99
Visit shop
Autotek Peugeot Cherry Fast Drying Aerosol Spray Paint 300mlFree delivery in 1–3 days£13.99Visit shop →
My Motor WorldAutotek Red Peugeot Cherry Spray Paint 300Ml
Free delivery in 1–3 days
£12.99
Visit shop
Autotek Red Peugeot Cherry Spray Paint 300MlFree delivery in 1–3 days£12.99Visit shop →
Product Information
Full details
This Autotek Aerosol Spray Paint is designed for car enthusiasts and DIYers seeking a precise color match for Peugeot vehicles from 1975-1986. Its key benefit is an exact color match with a fast-drying, durable finish for metal, glass fibre, and rigid plastic surfaces. A caveat is the need for good ventilation and specific temperature conditions during application.
All features
| Colour | Red |
|---|---|
| Model Part Number | MC358300 |
| Brand | Autotek |
| Container Volume | 300 |
Extended Product Information
FAQs
What specific Peugeot paint code does this spray match?
This Autotek Aerosol Spray Paint matches the Peugeot 'PRP' manufacturer paint code.
What years of Peugeot vehicles is this paint compatible with?
It is compatible with Peugeot models manufactured between 1975 and 1986.
What surfaces can I use this paint on?
The paint is suitable for application on metal, glass fibre, and rigid plastic surfaces.
How long does it take for the paint to dry?
The paint is touch dry in approximately 10-20 minutes after application. Full curing takes 24 hours.
Do I need to use a primer?
Yes, applying a minimum of two coats of Autotek Red Primer is recommended for optimum adhesion and the best possible finish.
Can this paint be used indoors?
No, it should only be used outdoors or in a very well-ventilated area due to the nature of aerosol paints.
What is the recommended spraying distance?
You should spray from a distance of 15-25cm away from the surface to be treated.
Troubleshooting
Paint nozzle is blocked or not spraying evenly.
Ensure the aerosol was shaken thoroughly before use. After spraying, turn the can upside down and spray for 2-5 seconds to clear the nozzle. If blockage persists, try gently cleaning the nozzle with a solvent or replace the can.
Poor adhesion or finish quality.
Verify that the surface was properly cleaned and free of contaminants. Ensure a minimum of two coats of primer was applied before the color coat. Check that the application temperature was within the recommended 15°C-25°C range and that the can was held at the correct distance.
Color match appears off.
Confirm that the correct manufacturer paint code (PRP) and vehicle model year range (1975-1986) are being matched. Ensure the paint was thoroughly mixed and applied evenly. Note that older paint can fade, so a perfect match to the original paint may vary slightly.
Paint is taking too long to dry.
Check the ambient temperature; drying times increase significantly below 15°C. Ensure thin coats were applied rather than one thick coat. Ensure the product is not applied to surfaces that have contaminants like silicone or wax, which can inhibit drying.
Pros and Cons
Pros
- Achieves a precise and professional color match.
- Fast-drying formula speeds up the painting process.
- Provides a durable and protective finish.
- Suitable for multiple automotive surface types.
- Compatible with a wide range of existing paint finishes.
Cons
- Requires use in a well-ventilated area or outdoors.
- Optimal application temperature range (15°C-25°C) must be maintained.
- Requires specific preparation steps like priming for best results.
- Only suitable for a defined range of Peugeot vehicle years.
- Long curing time of 24 hours for full durability.
Setup, Compatibility & Care Instructions
Preparation:
- Clean the target surface thoroughly, ensuring it is free from dirt, rust, wax, and oil.
- Mask off adjacent areas to prevent overspray.
- For optimal adhesion and finish, apply a minimum of two coats of Autotek Red Primer.
Application:
- Shake the aerosol can vigorously for approximately 2 minutes before use.
- Hold the can 15-25cm away from the surface.
- Spray in thin, even coats, allowing 10-20 minute intervals between each application.
- After each use, turn the aerosol upside down and spray for 2-5 seconds to clear the nozzle and prevent blockages.
Conditions:
- Use only outdoors or in a well-ventilated area.
- Apply within a temperature range of 15°C to 25°C.
Curing:
- The paint will be touch dry in 10-20 minutes.
- Allow 24 hours for the paint to fully cure.
Compatibility:
- Compatible with Peugeot models from 1975-1986 (Manufacturer Paint Code: PRP).
- Suitable for metal, glass fibre, and rigid plastic surfaces.
- Compatible with nearly all automotive paint finishes, including cellulose.