Shopping.co.uk

Clarks BMX Fixie Track Single Speed Chain - 1/2 x 1/8 x 112 Link

Clarks BMX Fixie Track Single Speed Chain - 1/2 x 1/8 x 112 Link

Clarks chains offer superior resistance to stretch, leading to less wear on drivetrain components ...

Best current price£9.99from Evans Cycles UK

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular
Evans Cycles UK£9.99Visit shop

Clarks Bmx Single Spd Chain 1/2X1/8 112 Links Spring Clip Single Spe None

Visit shop

All Offers

3 offers from £9.99

View price history by clicking the chart icon.

Evans Cycles UKClarks Bmx Single Spd Chain 1/2X1/8 112 Links Spring Clip Single Spe None
£4.99 delivery
£9.99
Visit shop
FrasersClarks Bmx Single Spd Chain 1/2X1/8 112 Links Spring Clip - No Colour - SINGLE SPE
Free delivery in 1–3 days
£9.99
Visit shop
Sports Direct UKClarks None Bmx Single Spd Chain 1/2X1/8 112 Links Spring Clip in Size SINGLE SPE, Sports Direct
£4.99 delivery
£9.99
Visit shop

Product Information

Full details

The Clarks BMX Fixie Track Single Speed Chain is designed for riders seeking a durable and efficient drivetrain solution for single-speed bicycles, including BMX, fixie, and track bikes. Its key benefit is superior resistance to stretch, which prolongs the life of your drivetrain components and maintains precise shifting. A potential consideration is its specific single-speed design, limiting compatibility with geared systems. This chain offers top performance, extreme durability, and a lightweight yet rigid construction for maximum efficiency, all while being supplied with a quick-release link connector for easy installation.

All features

Model Part Number5021646044949
BrandClarks

Extended Product Information

FAQs

What type of bikes is this chain designed for?

This chain is specifically designed for single-speed bicycles, including BMX, fixie, track bikes, and single-speed conversions of MTB and Road bikes.

What does '1/2 x 1/8' refer to?

This refers to the chain's dimensions: 1/2 inch is the length of each inner link (measured from pin center to pin center), and 1/8 inch is the width of the chain. This width is standard for most single-speed applications but ensure your chainring and cog match.

How do I install the quick-release link?

The quick-release link consists of two plates and a pin. Position the two plates on either side of the chain ends and insert the pin through the inner link plates. Then, slide the plates apart so the pin engages in the outer plates, locking the chain. Ensure it is fully seated and secure before riding.

Can I use this chain on a geared bike?

No, this chain is specifically designed for single-speed (1-speed) drivetrains and is not compatible with multi-speed or geared systems.

How often should I lubricate the chain?

It is recommended to lubricate the chain after cleaning, or whenever it appears dry. For regular riding, a check and re-lube every 100-200 miles, or after riding in wet conditions, is a good practice.

What is the expected lifespan of this chain?

The lifespan depends heavily on maintenance and riding conditions. With proper cleaning, lubrication, and tension, the chain's resistance to stretch helps it last significantly longer than standard chains, but regular inspection for wear is crucial.

Troubleshooting

Chain skipping or jumping

Check chain tension. Ensure it is not too loose. Also, inspect chainrings and cog for wear or damage. Clean and lubricate the chain thoroughly.

Chain is noisy

Clean the chain to remove grit and old lubricant. Re-lubricate with a fresh coat of quality chain lube. Ensure the quick-release link is properly secured.

Quick-release link feels loose

Carefully remove and re-install the quick-release link, ensuring both plates are fully engaged and the pin is seated correctly. Consult the manufacturer's guidelines for the specific link if available.

Premature wear on chain

Ensure the chain is kept clean and properly lubricated. Avoid riding in excessively wet or dirty conditions without adequate chain maintenance. Check for compatibility with your chainring and cog widths.

Pros and Cons

Pros

  • Extends the life of drivetrain components due to reduced stretch.
  • Maintains accurate shifting for longer periods.
  • Easy installation and removal with the included quick-release link.
  • Offers a good balance of performance, durability, and value.
  • Lightweight yet rigid construction enhances efficiency.

Cons

  • Not suitable for multi-speed geared bicycles.
  • The 1/8" width may not be compatible with all single-speed setups (confirm crank/cog width).
  • Requires proper maintenance to achieve maximum lifespan.
  • Quick-release links can sometimes be less secure than traditional pins under extreme stress.

Setup, Compatibility & Care

Setup:

  1. Ensure your rear cog and front chainring are 1/8" width compatible.
  2. Install the chain onto your chainring and cog.
  3. Use the included quick-release link connector to join the chain ends. Ensure it is properly seated and locked.
  4. Adjust chain tension according to your bicycle's frame and component specifications. For single-speed bikes, this typically involves sliding the rear wheel in the dropouts.

Compatibility:

  • Speeds: Designed for single-speed (1-speed) drivetrains.
  • Width: Primarily for 1/8" chainlines. Verify compatibility with your chainring and rear cog.
  • Bike Types: Ideal for BMX, Fixie, Track, and single-speed MTBs and Road bikes.

Care:

  • Cleaning: Regularly clean the chain with a degreaser and brush to remove dirt and grime. A clean chain runs more efficiently and lasts longer.
  • Lubrication: Apply a quality bicycle chain lubricant after cleaning and drying. Ensure the lubricant penetrates the rollers. Wipe off excess lubricant.
  • Inspection: Periodically inspect the chain for wear, damage, or stiff links. Replace the chain if significant wear or damage is observed to prevent damage to other drivetrain components.

Price History

DatePrice
Visit shop