Warhammer Citadel Base Paint - Zandri Dust 12ml

Zandri Dust is a specific shade of beige base paint within the Warhammer Citadel range, known for its earthy tone and good coverage.

For best results, shake the pot well, apply with a brush to a primed surface, and use two thin coats rather than one thick one. Thinning slightly with water or medium can improve smoothness.

Yes, but it typically requires thinning with an airbrush medium or a significant amount of water to achieve the right consistency for airbrush flow.

Citadel base paints are typically touch-dry within minutes, but full curing can take longer. Allow adequate drying time between coats.

Clean your brushes immediately after use with lukewarm water and a brush soap or cleaner. Avoid letting the paint dry on the bristles.

Yes, its high pigment count and smooth finish make it an excellent choice for beginners looking for reliable basecoats.

While it can adhere to some surfaces without a primer, using a Citadel primer or a compatible acrylic primer is highly recommended for optimal adhesion and paint performance.

Shake the pot vigorously. If still clumpy, add a very small amount of water or Citadel Technical Medium and mix thoroughly with a clean brush or palette knife.

Ensure the miniature was properly primed before application. If painting on bare plastic or metal, consider using a specific metal or plastic primer.

Thin the paint slightly with water or medium. Apply two thin coats, allowing each to dry fully, rather than one thick coat.

Try rehydrating the paint by adding a drop of water or Citadel Technical Medium and letting it sit for a few minutes before mixing. Store with the lid sealed tightly.