Best current price£32.83from eBay
Shopping.co.uk recommended and popular offers
eBay£32.83Visit shop AEG Bendix Electrolux Tricity Bendix Zanussi 2100watt Dishwasher Heater Element
Visit shop1 offer from £32.83
View price history by clicking the chart icon.
The Maddocks 34-ZN-19 dishwasher heater element is an essential replacement component designed for homeowners and DIY enthusiasts looking to restore heating performance to their AEG, Electrolux, Tricity Bendix, or Zanussi dishwashers. Delivering a robust 2100 watts of heating power, this versatile unit is compatible with over 750 different dishwasher models, making it a highly reliable spare part. While it offers broad compatibility and high performance, users must possess basic technical knowledge for disassembly and electrical connection to ensure a safe installation.
| Model Part Number | 34-ZN-19 |
|---|---|
| Brand | Maddocks |
No, this is a non-original, high-quality replacement element manufactured to be compatible with a wide range of dishwasher brands.
Check your machine's model number against the list provided. It is compatible with over 750 models, including series like ZSF, ZDT, and ESL.
If you are comfortable with basic appliance repair and electrical safety, yes. However, if you are unsure, consult a professional technician.
It is recommended to inspect your existing seals or use the mounting hardware included with the original housing during the swap.
You will typically need a screwdriver set, a pair of pliers for electrical connectors, and potentially a socket wrench to access the heater casing.
Check that the thermostat or NTC sensor is functioning correctly and verify that the wire terminals are fully pushed into the heating element tabs.
Ensure the rubber seal is seated correctly in the mounting hole and that the retaining nut or bracket is tightened evenly.
To install this heater element, ensure the dishwasher is completely disconnected from the electrical mains and water supply. Access the heater usually requires removing the side or base panel of the dishwasher. Once access is gained, note the positioning of the existing wires before disconnecting them from the old unit.
Check for signs of debris or lime scale around the old seal. It is recommended to clean the mounting area before inserting the replacement element to ensure a watertight fit. Always verify the earth connection is securely fastened to the earth tag to prevent electrical faults. After installation, perform a test run with an empty machine to monitor for leaks or overheating errors.
