High quality 8-speed cassette. Hyperglide sprockets have a computer designed tooth configuration w...High quality 8-speed cassette. Hyperglide sprockets have a computer designed tooth configuration with contoured shift gates, resulting in a crisp smooth shift even under load. Close ratio gearing allows a more efficient use of energy through finer cadence control.
Specification
Sprockets are cut away to further reduce weight without reducing rigidity
Nickel-plated finish offers hard wearing resistance to corrosion
Corrosion-resistant steel cassette lockring
For Narrow 8-speed HG chains
Weight: 380 g for 11 - 30T
Size: 11-28T, 11-30T, 11-32T, 11-34T, 12-25T
SHIMANO Sora Road Bike CS-HG50-8 8 speed 11-28t Cassette/ Sprocket£3.60 delivery£32.16Visit shop →
Product Information
Full details
This guide is for cyclists looking to upgrade their 8-speed drivetrain with the Shimano CS-HG50 cassette. The key benefit is improved shifting performance and durability thanks to Hyperglide technology. Note that this cassette is designed specifically for 8-speed HG chains.
All features
Model Part Number
ECSHG508128P
Brand
SHIMANO
Extended Product Information
FAQs
What tools do I need to install the Shimano CS-HG50 cassette?
You'll need a cassette tool, a chain whip, and a torque wrench.
What type of chain is compatible with this cassette?
This cassette is compatible with narrow 8-speed HG chains.
How often should I clean my cassette?
Clean your cassette regularly, ideally after every few rides, especially in wet or dirty conditions.
What is Hyperglide technology?
Hyperglide technology features a computer-designed tooth configuration and contoured shift gates, resulting in smooth and crisp shifting performance.
Can I use this cassette with a 7-speed drivetrain?
No, this cassette is only compatible with 8-speed drivetrains.
What is the weight of the Shimano CS-HG50 8-speed cassette?
The weight is approximately 380g for the 11-30T option.
What are the available size options?
Available sizes include 11-28T, 11-30T, 11-32T, 11-34T, and 12-25T.
Troubleshooting
Poor shifting performance.
Check and adjust the rear derailleur. Ensure the chain is clean and lubricated. Inspect the cassette for any damage.
Chain skipping on the cassette.
Check for chain wear and replace if necessary. Ensure the cassette is properly installed and tightened.
Lockring loosening.
Tighten the lockring to the manufacturer's recommended torque.
Pros and Cons
Pros
Improved shifting performance with Hyperglide technology.
Durable construction with a nickel-plated finish.
Efficient power transfer due to close ratio gearing.
Reduced weight from cutaway sprockets.
Cons
Only compatible with 8-speed drivetrains.
Requires a compatible HG-type freehub body.
Not the lightest cassette on the market.
May require professional installation if you are not familiar with the process.
Setup, Compatibility & Care
Setup:
Remove the rear wheel from the bicycle.
Unscrew the old cassette lockring using a cassette tool.
Slide the old cassette off the freehub body.
Clean the freehub body.
Slide the new CS-HG50 cassette onto the freehub body, ensuring it is correctly aligned.
Tighten the cassette lockring to the manufacturer's recommended torque using a torque wrench.
Reinstall the rear wheel.
Adjust the rear derailleur to ensure smooth shifting.
Compatibility:
Compatible with 8-speed drivetrains only.
Must be used with an 8-speed HG chain.
Fits HG-type freehub bodies.
Care:
Regularly clean the cassette with a degreaser to remove dirt and grime.
Use a brush to scrub between the sprockets.
Rinse with clean water and dry thoroughly.
Lubricate the chain regularly to ensure smooth shifting and prevent wear.