Kase Revolution Magnetic Circular ND64 and CPL with Adaptor - 77mm

The ND64 filter has a 64x filter factor, which equates to a 6-stop exposure reduction (1.8 density).

This specific model requires a 77mm lens thread and comes with a 77mm adapter. For other lens sizes, you would need a compatible Kase magnetic adapter ring for that specific thread size.

The circular polarizer is adjusted by rotating the outer ring of the filter after it has been magnetically attached to the lens adapter.

Yes, the magnetic system is designed to allow stacking of multiple Kase Revolution Magnetic Circular filters for advanced creative effects.

The magnetic mount is designed for a secure and quick attachment. However, in very demanding conditions, it's always wise to have a backup method or be mindful of potential dislodging.

Combining them saves time and complexity by allowing you to simultaneously control light intensity (ND) and manage reflections/enhance colors (CPL) with a single filter unit.

Ensure the magnetic adapter ring is screwed on straight and is clean. Check for any debris on the magnetic surfaces.

Rotate the outer ring of the CPL filter to adjust the polarization effect. Ensure the filter is aligned correctly with the light source.

Verify that the ND64 setting is engaged correctly. Adjust your camera's exposure settings as needed to compensate for the 6-stop reduction.

Ensure the filter is clean. If the cast persists, try removing the filter to see if the issue is with the camera or lens settings. Contact support if the problem continues.