Knipex 74 22 250 High Leverage Diagonal Side Cutter - 250mm

These pliers are designed for cutting piano wire and medium-hard wires. They are not suitable for very soft materials or extremely hard materials beyond their specified rating.

The 12° angled head allows for precise flush cutting of wires that protrude from flat surfaces, making it easier to work in confined spaces and achieve a clean finish without damaging surrounding materials.

Keep the cutting edges clean by wiping them after each use. Avoid using them on materials they are not designed for, as this can dull or damage the edges. Periodically lubricate the pivot for smooth operation.

While they can cut wires, they are not insulated for electrical work. Always ensure the power is disconnected before using any cutting tool on electrical wiring.

High leverage means the design of the plier, particularly the pivot mechanism, amplifies the force applied by the user, allowing for easier cutting of tougher materials with less effort.

It is recommended to lubricate the pivot periodically, especially after heavy use or if you notice any stiffness in the plier's action. A light machine oil is generally sufficient.

The pliers are manufactured from chrome vanadium electric steel, which is known for its strength, durability, and resistance to corrosion.

Ensure the pivot joint is clean and lightly lubricated. Check if the wire being cut exceeds the recommended hardness or diameter for this plier type.

Inspect cutting edges for damage or wear. If dull, they may require professional sharpening or replacement of the plier. Ensure no debris is lodged between the cutting edges.

Clean the pivot area thoroughly. Apply a light machine oil to the pivot. If still loose, the rivet may be damaged and require professional assessment.

Clean the affected area with a soft cloth. Apply a light coat of machine oil to prevent further rust. Store in a dry place.