Best current price£22.99from eBay
Shopping.co.uk recommended and popular offers
eBay£22.99Visit shop 4x Bartoline Filler Primer Quick Drying Plastic Metal Wood Adhesion Black 400mL
Visit shop
B&Q£43.99Visit shop B&Q - 4X Filler Primer Quick Drying Plastic Metal Wood Adhesion Black 400Ml
Visit shop3 offers from £22.99 - £43.99
View price history by clicking the chart icon.
The Bartoline Filler Primer in Black is designed for DIY enthusiasts and professionals looking to achieve a smooth, paint-ready surface. Its key benefit is its quick-drying, adherent formulation that prepares minor surface defects on metal, wood, and rigid plastics for a professional finish. A caveat to note is the requirement for use in well-ventilated outdoor areas and specific temperature ranges for optimal application.
| Colour | Black |
|---|---|
| Model Part Number | PP1288 |
| Brand | Bartoline |
The primer is quick-drying, allowing for recoating within 15-20 minutes. However, it requires 24 hours to fully harden.
No, this product should only be used outdoors or in a well-ventilated area due to its solvent-based formulation.
It is suitable for use on metal, wood, and rigid plastic surfaces.
Yes, for best adhesion of subsequent coats, the primer should be sanded down once dry.
The recommended temperature range for application is between 15°C and 25°C.
After each use, invert the can and spray for 2-5 seconds to clear the nozzle. Store the can upright.
Ensure the surface was properly cleaned and prepared before application. Reapply thin coats and ensure the surface is sanded after drying for optimal adhesion.
Ensure the can is shaken sufficiently before and during use. Check for nozzle blockages and clear them by inverting the can and spraying. Maintain the recommended spray distance.
Verify that the surface was thoroughly cleaned, dried, and free from oil or grease before application. Ensure the surface is suitable (metal, wood, rigid plastic) and has been adequately sanded after drying.
Check that the application temperature was within the recommended range (15-25°C) and that the product was not used in direct sunlight. Ensure thin coats were applied and not overloaded.
Immediately after use, invert the can and spray for 2-5 seconds to clear any residual product from the nozzle. If already blocked, try soaking the nozzle in a suitable solvent as per manufacturer recommendations.
Preparation is key: Before application, ensure the surface to be treated is clean, dry, and free from dirt, oil, and grease deposits.
Application: Shake the can well for approximately 2 minutes before use and continue to shake regularly during application. Spray onto the desired surface from a distance of 15-25cm. For best results, apply in thin layers, allowing 15-20 minute intervals between each coat.
Post-Application: Once dry, sand down the surface for the best adhesion. Allow the primer to fully harden for 24 hours. After use, invert the can and spray for 2-5 seconds to clear the nozzle and prevent blockages.
Compatibility: This primer is suitable for use on metal, wood, and rigid plastic surfaces.
Usage Conditions: Only use outdoors or in a well-ventilated area at temperatures between 15°C and 25°C. Do not use in direct sunlight.
Storage: Store in a cool, dry place.
