Briwax Wax Filler Sticks - Grey & Light Brown Shades (2 Pack)

For best results, select the stick color that most closely matches your wood finish. You can also mix or layer the Grey and Light Brown sticks to achieve a custom shade.

These wax filler sticks are best suited for natural wood finishes. While they may adhere to paint, they are not designed for painted surfaces and may not provide a durable or aesthetically pleasing result.

The durability depends on the location and use of the repaired area. For areas with light wear, the repair should last a considerable time. For high-traffic areas, occasional touch-ups may be needed.

Yes, once the wax filler has set, you can typically apply compatible wood polishes or finishes over the repaired area. Always test in an inconspicuous spot first.

Gently rub the stick directly into the scratch, crack, or gap. Ensure the wax fills the void completely. Use a plastic scraper to remove excess and then buff with a soft cloth.

While they offer a protective finish, they are primarily designed for indoor wood repairs. For outdoor use, consider products specifically formulated for exterior wood protection as outdoor conditions are more demanding.

Ensure the wood surface is clean, dry, and free of dust or grease. Warm the stick slightly with your hands or a gentle heat source (like a hairdryer on low) before application.

Try applying a small amount of the alternative color stick over the initial repair and buffing them together. You can also try gently buffing with a solvent like mineral spirits to slightly alter the tone.

Allow the wax to set completely. Use a plastic scraper to gently level the excess wax before buffing with a soft cloth. Avoid over-buffing, which can generate heat and melt the wax.

Store the sticks in a temperature-controlled environment. If too hard, gently warm the stick; if too soft, allow it to cool in a refrigerator for a short period.