Ener-J Britwall Shower Panel - Carrara Marble Grey Matt - 2400x1000x10mm

Yes, provided the existing tiles are well-adhered, smooth, and the surface is clean and dry. Any grout lines should ideally be filled to create a flatter surface for better adhesion.

A strong, waterproof panel adhesive specifically designed for PVC or wall panels is recommended. Always follow the adhesive manufacturer's guidelines for application.

Use a soft cloth with warm water and a mild, non-abrasive detergent. Rinse with clean water and dry with a soft cloth to prevent water spots.

These panels are designed primarily for wall applications in shower areas. Ceiling installation would require specific structural considerations and potentially different fixing methods not covered by standard guidelines.

Please refer to the retailer or manufacturer's documentation for specific warranty details, as this can vary.

While fully waterproof, extreme, constant high heat and humidity like in a sauna may affect the adhesive or material over time. They are best suited for standard bathroom showers and wet rooms.

Ensure the wall surface is thoroughly cleaned, dried, and free from any contaminants. Reapply adhesive, ensuring full coverage and proper pressure. Check if the adhesive used is suitable for PVC panels and the environment.

Re-seal the edges using a high-quality waterproof silicone sealant. Ensure any old sealant is removed before applying new sealant.

This may indicate exposure to excessive heat or harsh chemicals. Ensure cleaning is done with mild agents. Check for proper ventilation in the room to avoid extreme temperature fluctuations.

Use a sharp, fine-tooth blade on a saw or jigsaw. Secure the panel firmly before cutting and consider using masking tape along the cut line to minimize chipping.