Best current price£14.91from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£14.91Visit shop Stanley Hand Tools Light-Duty Corner Clamp 75Mm 5063750510897
Visit shop
B&Q£16.54Visit shop - Stanley Hand Tools Light-Duty Corner Clamp 75mm Multi Colour (One Size)
Visit shop2 offers from £14.91 - £16.54
View price history by clicking the chart icon.
The Stanley Light-Duty Corner Clamp is an essential tool for woodworkers and DIY enthusiasts who require precision when joining materials at 90-degree angles. Ideal for frame building, cabinetry, and small-scale furniture repairs, it excels at holding pieces of varying thicknesses securely in place during assembly; however, its light-duty construction means it is not suitable for heavy-duty industrial framing or high-pressure structural clamping.
| Brand | STANLEY Hand Tools |
|---|
Yes, it can be used for plastics or lightweight metals, provided they fall within the 75mm capacity and do not require extreme clamping pressure.
The clamp has a maximum capacity of 75mm.
No, it works fine as a standalone tool, but the mounting holes are provided if you prefer a permanent setup on your workspace.
No, this clamp is specifically engineered to hold materials at a precise 90-degree angle.
The clamp is made from cast aluminium, which is naturally resistant to rust; however, keeping it dry and clean after use will preserve the finish.
Clear any sawdust or debris from the threaded spindles and apply a small amount of machine oil.
Ensure that the surfaces of the wood are clean and free of grease; verify that you are not exceeding the 75mm clamping capacity.
To set up the clamp, place it on a flat surface or secure it to your workspace using the mounting holes and appropriate hardware. Loosen the adjustment handles until the gap is wider than your combined workpieces. Insert your materials into the jaws, ensure they are flush against the reference surfaces, and tighten the handles firmly but carefully to avoid over-tightening. For care, wipe away excess wood glue immediately with a damp cloth, as dried glue can affect the jaw movement. Periodically apply a small amount of light machine oil to the threaded rods to ensure the spindles rotate smoothly.
