Marabu Porcelain Painter Pens - Basic


Currently unavailable


Currently unavailable
This guide is for hobbyists, crafters, and parents looking to personalize ceramic and glass items. The Marabu Porcelain Painter Pens offer a simple way to create durable, dishwasher-safe designs with an odourless, water-based formula, ideal for children. A key consideration is the requirement for oven fixing to achieve full dishwasher resistance.
| Model Part Number | 0123000000080 |
|---|---|
| Brand | Marabu |
Yes, once properly oven-fixed, the paint is safe for food-contact surfaces. However, it is recommended to only paint on the non-food-contact areas of the item (e.g., the underside of a plate, the exterior of a mug).
The paint should be allowed to dry for approximately 4 hours before oven fixing.
Place the painted item in a cold oven, heat to 160 °C (320 °F), and bake for 30 minutes. Allow the item to cool down slowly in the oven afterwards.
These pens are specifically formulated for glass and porcelain. Performance on other materials may vary and is not guaranteed.
Store the pens horizontally to ensure even ink distribution and prevent drying out.
Yes, hand washing is possible before oven fixing, but it's recommended to avoid abrasive cleaners. After oven fixing, hand washing or the dishwasher is fine.
Light-fast means the colors are resistant to fading when exposed to light over time.
Shake the pen vigorously. Press the tip gently onto a test surface to re-prime the ink flow. Ensure the tip is clean.
Ensure the surface was clean and dry before painting. Allow adequate drying time (4 hours) before oven fixing. Double-check oven fixing procedure.
The design was likely not oven-fixed correctly. Ensure the item was oven-fixed at 160 °C for 30 minutes and cooled slowly. Re-apply and re-fix if necessary.
Shake the pen well before and during use. Apply paint with consistent pressure. For larger areas, consider multiple thin coats rather than one thick one.
Setup: These pens are ready to use directly from the packaging. Shake well before use and prime the tip if necessary by pressing it lightly on a test surface.
Compatibility: Primarily designed for porcelain and glass surfaces. Ensure the surface is clean, dry, and free from grease or dust before painting.
Care Instructions: