Fiddes Exterior High Build Wood Oil - 2.5 Litre
Best current price£65.08from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£65.08Visit shop B&Q - FiddesExterior High Build Wood OilContains Uv Filters2.5 Litre
Visit shopB&Q£65.08Visit shop One Offer
1 offer from £65.08
View price history by clicking the chart icon.
B&QB&Q - FiddesExterior High Build Wood OilContains Uv Filters2.5 Litre
Free delivery in 1–3 days
£65.08
Visit shop
Product Information
Full details
This guide is for homeowners and professionals seeking a durable, weather-resistant finish for exterior joinery and woodwork. The Fiddes Exterior High Build Wood Oil offers a quick-drying, water-repellent satin finish that won't peel or flake, thanks to its blend of natural oils and resins. A key benefit is its UV protection and VOC compliance, ensuring both longevity and environmental responsibility. However, users should note that thorough surface preparation is crucial for optimal results.
All features
| Model Part Number | 5060147671018 |
|---|---|
| Brand | Fiddes |
Extended Product Information
FAQs
How many coats of Fiddes Exterior High Build Wood Oil are recommended?
A maximum of two coats is recommended for optimal results. Apply thinly.
Do I need to use a primer with this oil?
No, a primer is not required. The oil can be applied directly to the prepared wood surface.
How long does it take for the oil to dry?
The oil typically dries in 4-6 hours, but it is preferable to leave it overnight between coats for best results.
Can I use this oil on interior wood?
This product is specifically formulated for exterior joinery and woodwork. For interior wood, a different Fiddes product might be more suitable.
What is the coverage rate?
The coverage rate is approximately 20-24 square meters per litre, depending on the porosity of the wood and the application method.
How should I prepare the wood surface before application?
The surface must be clean, dry, and free from any previous finishes. Sand with 120-grade sandpaper and remove all dust. Remove any moss or dirt from old wood.
Will this oil change the color of my wood?
The oil provides a transparent satin finish, which enhances the natural color and grain of the wood rather than altering it significantly.
Troubleshooting
Surface feels sticky or tacky after drying.
Surplus oil was not removed completely. Wipe the surface down with a cloth dampened with the product and allow to dry fully.
Uneven sheen or color on the wood.
Ensure oil was applied thinly and evenly, and all excess was wiped off immediately after application. Apply a further thin coat if necessary, ensuring proper removal of surplus.
Wood still looks dull after application.
The wood may have absorbed the first coat very quickly. Apply a second, thin coat, ensuring excess is removed. If the wood is very dry, more frequent reapplication might be needed over time.
Product is difficult to spread thinly.
Ensure the brush is not overloaded and that the oil is applied in thin, even layers. The product is designed for thin application.
Pros and Cons
Pros
- Excellent weather resistance and durability for exterior use.
- Quick drying time speeds up the application process.
- Contains UV filters to prevent wood fading and damage from sunlight.
- Environmentally friendly with VOC compliance.
- Water repellent finish protects against moisture ingress.
- Transparent satin finish highlights the natural wood grain.
Cons
- Requires thorough surface preparation, including sanding and ensuring dryness.
- Only a maximum of two coats are recommended, limiting build-up.
- Surplus material must be removed immediately to avoid uneven finish.
- Application requires specific drying times between coats (4-6 hours or overnight).
Setup, Compatibility & Care
Preparation is Key
Ensure all surfaces are clean, dry, and free from any existing finishes. For old wood, remove any fungal growth, dirt, or moss. If the wood is untreated, a suitable preservative should be applied first. Sand the surface with a medium 120-grade sandpaper or sanding disc, then remove all dust.
Application
Apply only in dry conditions. It is always recommended to test the oil on a small, inconspicuous area before full application.
- Stir: Thoroughly stir the contents before and during use. No thinning is required.
- First Coat: Apply thinly using a good quality bristle or synthetic brush. Apply evenly, brushing in the direction of the wood grain. Immediately remove any surplus material with a clean cloth, checking carefully for excess. Allow to dry for 4-6 hours, or preferably overnight.
- Light Sand: After the first coat has dried, lightly sand with a 320-grade sandpaper.
- Second Coat: Apply the second coat thinly, ensuring good ventilation. Allow to dry for 4-6 hours, or preferably overnight.
Maximum Coats: A maximum of two coats is recommended.
Compatibility: Suitable for all exterior joinery and woodwork. No primer is required.
Care: To maintain the finish, periodically clean the wood with a mild detergent and water. Reapplication may be necessary every 1-3 years depending on exposure and wear, following the preparation and application steps.