Fastcap Screw Cover Caps - White - 14mm

The 14mm Fastcap Screw Cover Caps are designed to cover screw heads that are approximately 9/16 inches (14mm) in diameter.

No, Fastcap Screw Cover Caps are single-use adhesive products and are not designed for reapplication once removed.

While possible, it is recommended to test adhesion on a single cap first. High-performance acrylic may resist some paints. Ensure the surface is clean before attempting to paint.

Each individual cap is very lightweight, with the product listing a weight of 0.01 pounds.

The product information does not specify the quantity per package. Please refer to the specific product listing for quantity details.

The caps are made with high-performance acrylic, suggesting some durability. However, prolonged exposure to harsh weather conditions may affect adhesion and longevity. For best results, use in protected environments.

Carefully try to lift an edge with a thin, flat tool (like a putty knife or fingernail) and peel it off slowly. Be cautious to avoid scratching the underlying surface.

Ensure the surface is thoroughly cleaned and dried before application. Check that the caps are pressed firmly onto the screw head for at least 10 seconds.

Verify the screw head size. These caps are specifically designed for 14mm (approx. 9/16 inch) diameter screw heads. Larger or smaller screw heads may require different sized caps.

Re-evaluate the surface material. Ensure it is a suitable surface for adhesive products. Extreme temperature fluctuations or high humidity can also affect adhesion over time.

While these caps are a standard white, slight color variations can occur. For critical color matching, consider painting the caps after application (test adhesion first) or using a different color Fastcap if available.