Simply Door Edge Guard - Transparent - Anti-Scratch
Best current price£6.49from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£6.49Visit shop DE-1505 Simply Auto Transparant Door Edge Guard 15mm*5M
Visit shopeBay£6.49Visit shop All Offers
2 offers from £6.49 - £7.48
View price history by clicking the chart icon.
eBayDE-1505 Simply Auto Transparant Door Edge Guard 15mm*5M
Free delivery in 1–3 days
£6.49
Visit shop
Simply Transparent Anti-Scratch Door Edge Guard 15mm X 4m Polyurethane FASTP&PFree delivery in 1–3 days£7.48Visit shop →
Product Information
Full details
This guide is for anyone looking to protect their vehicle's door edges and other surfaces from scratches and scuffs using the Simply Door Edge Guard. The primary benefit is the durable, transparent protection it provides, ensuring your vehicle maintains its aesthetic appeal. Keep in mind that while it's easy to apply, proper surface preparation is crucial for optimal adhesion.
All features
| Model Part Number | DEG01 |
|---|---|
| Brand | Simply |
Extended Product Information
FAQs
Can I use this on any vehicle?
Yes, the Simply Door Edge Guard is designed to fit most vehicles. However, ensure the application surface is clean and properly prepared before installation.
How do I clean the door edge guard?
Clean with a damp cloth and mild soap. Avoid abrasive cleaners or solvents that may damage the guard.
Will the guard damage my car's paint?
No, the guard is designed to protect your car's paint. However, ensure the surface is clean before application.
How long does the adhesive last?
The adhesive should last for several years under normal conditions. The longevity depends on environmental factors and how well the surface was prepared.
Can I remove the guard?
Yes, the guard can be removed. Carefully peel it off, and any adhesive residue can be removed with adhesive remover.
What is the guard made of?
The Simply Door Edge Guard is made of high-grade TPU (Thermoplastic Polyurethane) with XPPF coating, providing UV and weather resistance.
Is it easy to cut?
Yes, it is easy to cut with scissors or a utility knife to the desired size.
Where else can I use this guard?
The guard can be applied to various surfaces like stainless steel, ceramic, and plastic. It is not limited to just door edges.
Troubleshooting
The guard is not sticking properly.
Ensure the surface is clean, dry, and free of any wax or sealant before application. Apply firm pressure during installation and allow sufficient time for the adhesive to cure.
Air bubbles are present under the guard.
Carefully lift the affected area and smooth out the bubbles with a clean cloth or your fingers. Use a pin to release any trapped air and smooth again.
The guard is peeling off at the edges.
Ensure the edges are properly sealed and that the guard is applied smoothly. Trim any excess material and apply additional pressure to the edges. Consider using a heat gun or hair dryer on low setting to activate the adhesive.
Pros and Cons
Pros
- Provides effective protection against scratches and minor impacts.
- Maintains the original look of your vehicle due to its transparent design.
- Offers UV and weather resistance, ensuring long-lasting performance.
- Easy to install with a simple peel-and-stick application.
- Versatile application suitable for various surfaces.
- Easy to clean and remove
Cons
- Requires careful surface preparation for optimal adhesion.
- May require precise cutting for a perfect fit on complex curves.
- The longevity of the adhesive may vary depending on environmental conditions.
- The guard might be visible upon close inspection.
- Potential for air bubbles if not applied carefully.
Setup, Compatibility & Care
Setup
- Clean the Surface: Thoroughly clean the area where you intend to apply the guard using a mild detergent and water. Ensure it's completely dry.
- Cut to Size: Measure the area and cut the guard to the appropriate size using scissors or a utility knife.
- Peel and Apply: Peel off the backing paper and carefully position the guard on the surface.
- Smooth and Secure: Use a clean cloth or your fingers to smooth out any air bubbles and ensure the guard adheres firmly.
- Allow to Settle: Allow the guard to sit for at least 24 hours before exposing it to harsh conditions.
Compatibility
The Simply Door Edge Guard is compatible with most vehicle models and can be applied to various surfaces, including:
- Painted surfaces
- Stainless steel
- Ceramic
- Plastic
Care
- Cleaning: Clean the guard with a damp cloth and mild soap. Avoid using abrasive cleaners or solvents.
- Inspection: Regularly inspect the guard for any signs of damage or peeling. Replace if necessary.