Meguiar's Ultimate Wash & Wax - 473ml

The Meguiar's Ultimate Wash and Wax enables cars to retain the 'as waxed' finish in between full w...

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later.

Product Information

Full details

The Meguiar's Ultimate Wash and Wax is designed for car owners who want to maintain a freshly waxed appearance between full waxing sessions, significantly boosting gloss and protection with each wash. While it offers impressive sudsing and a visible, tangible cleaning action, users should be aware that it is a maintenance product and not a replacement for a deep, multi-stage wax application.

All features

Model Part NumberG17716EU
BrandMeguiar's

Extended Product Information

FAQs

Is this a replacement for waxing my car?

No, Meguiar's Ultimate Wash and Wax is designed to *maintain* the 'as waxed' finish between full waxing sessions. It adds a layer of protection and shine but is not a substitute for a dedicated wax or sealant application.

How much product should I use per wash?

Refer to the product label for the exact dilution ratio. Typically, it is around 1 ounce (approx. 30ml) of product per gallon (approx. 3.8 liters) of water. Always follow the manufacturer's recommendations.

Can I use this product on my RV or boat?

While primarily designed for automotive finishes, the cleaning and waxing properties can be effective on other gel coat or painted surfaces. Always test in an inconspicuous area first.

Will this product strip existing wax or sealants?

No, this product is formulated to be safe for existing wax and sealant layers, and it works to enhance and maintain them.

How often should I use Meguiar's Ultimate Wash and Wax?

You can use it every time you wash your vehicle. It is safe for regular use and helps maintain the paint's protection and shine with each wash.

What is the difference between this and a regular car shampoo?

Regular car shampoos primarily clean the surface. Meguiar's Ultimate Wash and Wax cleans while also depositing a blend of carnauba wax and synthetic polymers to boost gloss and add a protective layer.

Can I use this in a foam cannon?

Yes, this product is generally suitable for use in a foam cannon. Follow the foam cannon manufacturer's instructions for dilution ratios, as they may differ from bucket washing.

Troubleshooting

Insufficient suds

Ensure you are using the correct dilution ratio as per the product label. Use a strong stream of water when filling the bucket to agitate the soap and create more suds.

Streaking after washing and drying

This can occur if the product is dried onto the surface or if the vehicle is washed in direct sunlight/on a hot surface. Ensure the car is rinsed thoroughly and dried immediately with a clean, high-quality microfiber towel. If streaks persist, try using a separate detailer spray to remove them.

Not adding enough shine or protection

This product is designed to maintain an existing waxed finish. If the underlying paintwork has no wax or sealant, the shine and protection will be minimal. Apply a dedicated wax or sealant first, then use this product for maintenance.

Pros and Cons

Pros

  • Maintains a 'just waxed' look with regular washing
  • Significantly enhances gloss and shine
  • Provides a protective layer after washing
  • Rich, abundant suds create a safe washing experience
  • Easy to use for routine car maintenance

Cons

  • Not a substitute for a full, deep wax treatment
  • May require more product for heavily soiled vehicles
  • Effectiveness depends on the quality of the underlying wax layer

Setup, Compatibility & Care Instructions

Setup:

  1. Add the recommended amount of Meguiar's Ultimate Wash and Wax to a bucket of water. Check the product label for specific dilution ratios (typically 1 oz. per gallon).
  2. Fill the bucket with clean water, preferably using a hose with a good flow to activate the suds.
  3. Agitate the water gently to ensure the product is fully mixed.

Compatibility:

This wash and wax is safe for all car finishes, including clear coats, single-stage paint, and existing wax or sealant layers. It is compatible with all Meguiar's cleaning tools and accessories.

Care:

  • Always wash your car in the shade or when the surface is cool to the touch.
  • Use a clean wash mitt and separate buckets for washing and rinsing to prevent grit from scratching the paint.
  • Rinse the vehicle thoroughly after washing to remove all soap residue.
  • For best results, dry the vehicle immediately with a clean microfiber drying towel.
  • Store the product in its original container in a cool, dry place, away from direct sunlight.