Best current price£125.97from Wayfair UK
Shopping.co.uk recommended and popular offers
Wayfair UK£125.97Visit shop Magnum Flush Mount
Visit shop
B&Q£142.99Visit shop B&Q - Luminosa Magnum 3 Light Spotlights Bar Brushed SteelGu10
Visit shop3 offers from £125.97 - £154.95
View price history by clicking the chart icon.
The Luminosa Lighting Magnum 3-Light Brushed Steel Spotlight Bar in Grey is designed for homeowners looking to enhance large rooms with layered lighting or add focused task lighting to kitchens and home offices. Its key benefit is providing versatile, stylish illumination with adjustable heads. A caveat is that bulbs are not included, requiring a separate purchase. This spotlight bar features a brushed steel finish, three adjustable GU10 lamp heads, and a dimmable function for ambiance control.
| Colour | Grey |
|---|---|
| Brand | Luminosa Lighting |
The Luminosa Lighting Magnum 3-Light Spotlight Bar uses GU10 type bulbs.
No, the bulbs are not included and must be purchased separately.
The maximum wattage for each GU10 bulb is 50W.
Yes, you can use LED GU10 bulbs, provided they are dimmable if you wish to use the dimming feature.
No, this spotlight bar has an IP20 rating, which means it is only suitable for dry indoor locations and should not be used in bathrooms or areas with high moisture.
The length of the spotlight bar is 55cm.
Yes, the lamp heads are moveable, allowing you to direct the light as needed.
Check that the power supply is on and the circuit breaker is not tripped. Ensure bulbs are correctly seated in their sockets. Verify all wiring connections are secure.
Try replacing the bulb in the non-working socket with a known working bulb. Check the wiring connection to that specific lamp holder. Ensure the bulb is the correct type (GU10) and wattage.
Ensure you are using dimmable bulbs. Check if the dimmer switch is compatible with LED or halogen bulbs (depending on your choice) and the total wattage. Loose bulb connections can also cause flickering.
Wipe gently with a soft, slightly damp cloth. Avoid harsh chemicals or abrasive cleaners. For stubborn marks, consult a cleaning guide for brushed steel finishes.
Setup: This spotlight bar requires installation by a qualified electrician. Ensure the power supply is switched off at the mains before commencing any work. Mount the bar securely to the ceiling or wall according to the provided instructions. Insert compatible GU10 bulbs (max 50W each) into each socket. Connect the wiring as per the installation manual.
Compatibility: The spotlight bar uses GU10 lamp types. It is dimmable, so it requires compatible dimmable GU10 bulbs and a compatible dimmer switch for full functionality. It is designed for indoor use in dry locations (IP20 rated).
Care: To clean, always ensure the power is switched off and the unit has cooled down. Wipe the brushed steel finish with a soft, dry or slightly damp cloth. Avoid using abrasive cleaners or solvents, as they can damage the finish. Ensure no moisture enters the electrical components.
