Philips TUV TL-D 30W UV Lamp - 30W

Best current price£4.79from www.pond-planet.co.uk
Best offers
Shopping.co.uk recommended and popular offers
www.pond-planet.co.uk£4.79Visit shop Pond Planet Green Replacement T5/T8 Uv Lamps
Visit shop
Best current price£4.79from www.pond-planet.co.uk
Shopping.co.uk recommended and popular offers
www.pond-planet.co.uk£4.79Visit shop Pond Planet Green Replacement T5/T8 Uv Lamps
Visit shop14 offers from £4.79 - £34.22
View price history by clicking the chart icon.
This Philips TUV TL-D 30W UV lamp is for users needing effective UV disinfection for ponds, air, or water. Its key benefit is reliable germicidal performance with a long lifespan. A caveat is that it requires an external ballast and ignitor to operate. This 30W, double-ended T8 fluorescent bulb offers a total length of 908.8mm and is designed for applications requiring a 98-106V power range.
| Model Part Number | FT030GERM/01 |
|---|---|
| Brand | Philips |
It is generally recommended to replace the lamp annually, or after approximately 9000 hours of use. Even if the lamp still illuminates, its germicidal effectiveness decreases significantly over time.
Yes, this lamp requires an external ballast and an ignitor to operate. It is not a standalone product and must be installed in a compatible UV disinfection unit.
Double-ended means the lamp has electrical contacts at both ends, allowing it to be used in fixtures designed with sockets at each end.
No, you must use it in a system specifically designed for a 30W, T8 (1" diameter), double-ended UV lamp operating within the 98-106V range and requiring a compatible ballast and ignitor.
Lamps typically lose UV output before they stop illuminating entirely. Replace annually or based on usage hours (approx. 9000 hours). If you notice a decline in water clarity or disinfection effectiveness, it's a strong indicator for replacement.
T8 refers to the lamp's diameter, which is 8/8ths of an inch, or 1 inch (approximately 25.4mm).
Ensure the ballast and ignitor are correctly connected and functioning. Check that the lamp is properly seated in its sockets. Verify the power supply to the ballast.
Confirm the lamp is operational and has sufficient UV output (consider replacement if it's old). Check if the UV unit's flow rate is too high for the lamp's effectiveness. Ensure the quartz sleeve is clean.
This may indicate a failing ballast or ignitor, or a poor connection. Inspect wiring and components. If the lamp itself is old, consider replacing it.
Setup: This lamp requires a compatible UV ballast and ignitor to operate. Ensure the power supply matches the lamp's specifications (98-106V). Install the lamp carefully, ensuring a secure fit in the socket. Always disconnect power before installation or removal.
Compatibility: This is a 30W, double-ended T8 (1" diameter) UV lamp. It is compatible with UV clarifiers and disinfection systems designed to accept this specific wattage and form factor, such as the Yamitsu Algae Master 30w, or other units requiring a 30W G13 base UV bulb. Verify your existing fixture's specifications.
Care: Handle the lamp by its end caps only to avoid transferring oils from your skin, which can create hot spots and reduce lifespan. Clean the quartz sleeve (if applicable) of your UV unit regularly according to the manufacturer's instructions, as mineral buildup can reduce UV transmission. Replace the lamp annually or after approximately 9000 hours of use, even if it still lights up, as UV output degrades over time.