This axial extractor fan is typically used in bathroom locations and operates with the room light ...This axial extractor fan is typically used in bathroom locations and operates with the room light switch. When the light is switched on, the fan activates. When the light is switched off, the fan continues to run for a pre-set time. It features a built-in humidistat that turns the fan on when the relative humidity reaches a set threshold. The humidistat will always over-ride the timer, even when the room light is off. For correct operation, this fan requires a permanently live, switched live, and neutral connection (3 wires excluding earth) at the fan position. The run-on timer function is only usable with these three wires. The fan has an automatic backdraught shutter. The extract rate is 23 litres per second (85 cubic metres per hour). Dimensions are 165mm x 165mm x 60mm deep, with a 55mm rear projection and a 98mm diameter exhaust. It operates on Mains 230/240 volt.
This axial extractor fan is typically used in bathroom locations and operates with the room light switch. When the light is switched on, the fan activates. When the light is switched off, the fan continues to run for a pre-set time. It features a built-in humidistat that turns the fan on when the relative humidity reaches a set threshold. The humidistat will always over-ride the timer, even when the room light is off. For correct operation, this fan requires a permanently live, switched live, and neutral connection (3 wires excluding earth) at the fan position. The run-on timer function is only usable with these three wires. The fan has an automatic backdraught shutter. The extract rate is 23 litres per second (85 cubic metres per hour). Dimensions are 165mm x 165mm x 60mm deep, with a 55mm rear projection and a 98mm diameter exhaust. It operates on Mains 230/240 volt.