Xtremeauto Heat Resistant Paint - Deep Bronze Green
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for anyone looking to use Xtremeauto Heat Resistant Paint in Deep Bronze Green for their bikes, cars, or motorbikes. The key benefit is its ability to withstand high temperatures up to 180°C while providing excellent color coverage and a durable gloss finish. Keep in mind that this paint is not suitable for aluminum surfaces.
All features
| Model Part Number | High_Temperature_temp_Drum_Stove_AEROSOL_Bare_10 |
|---|---|
| Brand | XtremeAuto |
Extended Product Information
FAQs
What surfaces can I use this paint on?
This paint is suitable for use on bare metal surfaces. Avoid using it on aluminum.
How many coats should I apply?
Apply multiple thin coats for the best results. Allow 10 minutes between coats.
How long does it take for the paint to dry?
The paint is typically handleable within 1 hour. Allow the paint to fully cure for maximum durability.
What is the heat resistance of this paint?
The paint can withstand temperatures up to 180°C.
Do I need to use a primer?
No, you can apply this paint directly to bare metal surfaces without a primer.
Can I use this paint on my car's engine?
Yes, it is suitable for use on engine parts.
Is this paint resistant to chemicals?
Yes, it's resistant to oil, petrol, diesel, and stone chips.
Troubleshooting
Paint is running or dripping.
Apply thinner coats and ensure you are maintaining the correct distance from the surface when spraying.
Paint is not adhering properly.
Ensure the surface is thoroughly cleaned and free of any contaminants before application. Lightly sand the surface for better adhesion.
Color is uneven.
Apply multiple thin coats, allowing adequate drying time between each coat.
Pros and Cons
Pros
- High heat resistance up to 180°C
- Excellent color coverage with a gloss finish
- Resistant to oil, petrol, diesel, and stone chips
- Fast-drying for quick project completion
- Can be applied directly to bare metal, saving time and effort
Cons
- Not suitable for use on aluminum surfaces
- Requires proper surface preparation for optimal results
- Limited to a Deep Bronze Green color
Setup, Compatibility & Care
- Surface Preparation:
- Ensure the surface is clean, dry, and free from dirt, oil, or grease.
- Remove any existing rust or loose paint.
- Application:
- Stir the paint well before use.
- Apply in thin, even coats using the aerosol spray.
- Maintain a consistent distance from the surface.
- Allow approximately 10 minutes between coats.
- Drying & Handling:
- The paint is typically handleable within 1 hour.
- Allow the paint to fully cure according to the product's specific instructions for maximum durability.
- Compatibility:
- Suitable for use on bare metal surfaces.
- Not suitable for aluminum.
- Care:
- Clean painted surfaces with a mild soap and water solution.
- Avoid using abrasive cleaners or solvents.