Voltage: 11.0 V / Thread (ISO): M 10 x 1,25 / Torque: 15 Nm / Length: 125 mm Bosch developed the D...Voltage: 11.0 V / Thread (ISO): M 10 x 1,25 / Torque: 15 Nm / Length: 125 mm Bosch developed the Duraterm technology: Reaches the preheating temperature of approximately 850°C in about 5 seconds Knowledge from original equipment since 1922: Extensive diesel experience is also in the glow plug workshop programme Post glow time of up to 3 minutes: Additional functions such as, intermediate and regeneration annealing, ensure smooth running and comfort in all load ranges Bosch glow tube: Provides long service life and protection against corrosion Please use the vehicle identification to confirm compatibility with your vehicle - all restrictions must be observed All work should only be carried out by trained specialists
This guide is for vehicle owners and mechanics looking to maintain or replace diesel engine glow plugs. The Bosch Diesel Engine Glow Plug (0250213011) offers rapid heating and extended post-glow functionality for smoother engine operation and improved comfort. A key caveat is that installation requires specialized knowledge and tools, and compatibility must be confirmed via vehicle identification.
All features
Model Part Number
0250213011
Brand
Bosch
Extended Product Information
FAQs
How long does the Bosch 0250213011 glow plug take to heat up?
The Bosch glow plug with Duraterm technology reaches a preheating temperature of approximately 850°C in about 5 seconds.
What is the purpose of the post-glow time?
The post-glow time, which can last up to 3 minutes, ensures smooth running and comfort by performing intermediate and regeneration annealing, especially after the engine has started.
How do I ensure this glow plug is compatible with my vehicle?
You must use your vehicle's identification number (VIN) to confirm compatibility. Consult your vehicle's owner's manual or a professional mechanic for assistance.
Can I install this glow plug myself?
Installation requires specialized tools and knowledge of diesel engine systems. It is strongly recommended that installation be performed by a trained specialist to avoid damage and ensure proper function.
What does the '15 Nm' torque specification mean?
15 Nm (Newton-meters) is the recommended tightening torque for this glow plug. Overtightening or undertightening can cause damage or improper function.
What are the benefits of Bosch's extensive diesel experience?
Bosch's knowledge, dating back to 1922 for original equipment, means their glow plugs are developed with a deep understanding of diesel engine requirements, leading to reliable and efficient performance.
How can I tell if my glow plugs need replacing?
Symptoms include difficulty starting, especially in cold weather, rough idling, increased exhaust smoke, and illumination of the check engine light. A diagnostic scan can also reveal glow plug system issues.
Troubleshooting
Engine struggles to start in cold weather
Verify the glow plug system is functioning correctly. Check for fault codes related to the glow plug control module. Ensure all glow plugs are within their operational lifespan and properly installed.
Rough idling or engine misfires after starting
This could indicate a malfunctioning glow plug or an issue with the post-glow system. Have the glow plugs tested individually. Ensure the engine's air and fuel filters are clean.
Check engine light is illuminated
Scan the vehicle's diagnostic system for error codes. Codes related to the glow plug circuit (e.g., P0380, P0381) will require further diagnosis of the glow plugs and their control unit.
Glow plug physical damage found during inspection
Replace the damaged glow plug immediately. It is advisable to replace all glow plugs in the engine at the same time to ensure uniform performance.
Pros and Cons
Pros
Rapid preheating reduces engine start times.
Extended post-glow enhances engine running smoothness and comfort.
Durable design with corrosion protection contributes to a long service life.
Leverages Bosch's deep expertise in diesel technology for reliability.
Cons
Installation requires specialized knowledge and tools.
Compatibility must be meticulously checked using vehicle identification.
Component failure can lead to significant engine performance issues.
Setup, Compatibility & Care
Setup:
Confirm Compatibility: Crucially, use your vehicle's identification number (VIN) to verify that this glow plug model is suitable for your specific diesel engine. Observe all vehicle restrictions.
Professional Installation: Due to the sensitive nature of glow plugs and their integration into the engine's combustion system, installation should only be performed by trained automotive specialists.
Torque Application: Ensure the glow plug is tightened to the specified torque of 15 Nm using a calibrated torque wrench. Incorrect torque can lead to component failure or engine damage.
Compatibility:
This glow plug is designed for 11.0 V diesel systems with an M 10 x 1.25 thread.
Always consult your vehicle's service manual or a qualified mechanic to confirm fitment before purchase and installation.
Care:
Glow plugs are typically maintenance-free components once installed correctly.
Regularly check your engine's overall performance for any signs of issues that might indirectly relate to glow plug function, such as difficult starting or rough idling.
If replacement is necessary, it is often recommended to replace all glow plugs in the engine simultaneously to ensure consistent performance.