Hudson Reed Richmond Basin with 2 Tap Holes and Full Pedestal

This basin requires a 'slotted' waste due to the presence of an integrated overflow hole.

No, this basin has two tap holes designed for widespread taps (requiring two separate hot and cold taps). A monobloc tap will not fit.

The product includes the basin, the full pedestal, and an overflow fitting. Taps, fixings, and a waste are not included.

Hudson Reed offers a 5-year manufacturer's guarantee against manufacturing defects. This excludes damage from poor installation, accidental damage, improper use, or normal wear. Working parts are covered for 6 months.

While it has a full pedestal, the basin itself can be wall-hung to save floor space if needed, making it adaptable. However, its overall dimensions should be checked against the available space.

Clean with a soft, damp cloth and a mild, non-abrasive detergent. Rinse and dry thoroughly. Avoid abrasive cleaners.

No, this basin is explicitly stated as unsuitable for commercial use.

Ensure all wall fixings (if wall-hung) or pedestal securing points are tightened correctly. For pedestal installations, verify the pedestal is firmly seated and potentially secured to the wall.

Check that tap bases and the waste fitting are sealed correctly with appropriate plumber's putty or silicone sealant. Ensure the basin's threaded holes are not damaged.

Confirm that a *slotted waste* is installed, as this is required for the overflow to drain properly. Check for any blockages in the overflow channel or the waste pipe.