C.K Vorteck Fast Flat Wood Drill Bit Set - 9 Piece - T2953
Best current price£33.99from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£33.99Visit shop CK Tools T2953 Vorteck Fast Flat Wood Drill Bits - Set of 9
Visit shopeBay£33.99Visit shop All Offers
2 offers from £33.99 - £53.09
View price history by clicking the chart icon.
eBayCK Tools T2953 Vorteck Fast Flat Wood Drill Bits - Set of 9
Free delivery in 1–3 days
£33.99
Visit shop
CK T2953 Vorteck Fast Flat Wood Bits - 9pc SetFree delivery in 1–3 days£53.09Visit shop →
Product Information
Full details
The C.K Vorteck 9 Piece Fast Flat Wood Drill Bit Set (T2953) is a high-performance solution for professional tradespeople and serious DIYers who need to drill large holes in timber quickly and accurately. Its primary benefit is the threaded self-driving tip, which pulls the bit through the wood with minimal physical effort, though users should note that the aggressive pull requires a stable drill grip to prevent 'grabbing' in softer wood types.
All features
| Model Part Number | T2953 |
|---|---|
| Brand | C.K |
Extended Product Information
FAQs
Can these bits be used with a standard cordless drill?
Yes, they are compatible with both standard drill chucks and impact drivers using the 1/4 inch hex system.
What is the largest size included in the set?
The set includes a maximum diameter of 32mm.
Are these bits suitable for drilling metal?
No, these are specifically designed for wood applications only.
How do I sharpen the bits?
You can use a small fine-grit file on the cutting edges; avoid damaging the threaded self-driving tip.
Will these bits work with hardwoods?
Yes, the heat-treated steel is capable of cutting through hardwoods, though it will naturally be slower than in softwoods.
Troubleshooting
Bit stalling during drilling
Reduce the drill speed or apply slightly less pressure to allow the bit to clear debris from the hole.
Excessive splintering on the exit side
Drill until the tip just protrudes from the other side, then finish the hole from the opposite direction.
Bit is difficult to remove from the wood
Switch your drill to reverse mode and pull straight back while slowly engaging the trigger.
Pros and Cons
Pros
- Significantly faster drilling speeds than traditional flat bits
- Self-feeding action reduces physical strain
- Durable carbon steel construction
- Standardized hex shank compatible with most impact drivers
- Organized storage case included
Cons
- Aggressive feed can catch in softer wood types
- Not suitable for drilling through metal or masonry
- Limited to flat bit applications
Setup, Compatibility & Care
To set up the bits, simply insert the 1/4 inch hex shank into your impact driver or drill chuck and ensure the locking mechanism is fully engaged. These bits are fully compatible with any standard hex quick-change holder. Regarding care, clean the bits after each use to remove wood resin and debris, which can accumulate in the flute and slow down performance. While the bits are corrosion-resistant, storing them in the provided case will prevent moisture buildup and help maintain the sharpness of the cutting edges. Periodically inspect the self-driving tip for burrs or damage; if the tip becomes blunt, it can be carefully touched up with a small file.