MAHLE X35+ Trio Can V2 - MH31010100000200

The handlebar remote allows you to control the assist level, switch on lights, and use the walk assist function directly from your handlebars.

The product description notes that a y-adapter wire is needed for its wired connection, implying it may not be included and needs to be sourced separately or is part of a specific bike integration.

It supports ANT+ and CAN BUS communication protocols.

This product is designed for e-bike systems that are compatible with ANT+ and CAN BUS communication and require a wired connection. Compatibility should be verified with your specific e-bike model.

Clean the remote with a soft, damp cloth. Avoid using abrasive materials or harsh cleaning chemicals.

The walk assist feature provides a low-power assistance to help you push your bike along at a walking pace, which is useful on steep inclines or when dismounted.

If your heart rate monitor uses ANT+ technology, it may be possible to connect it to an e-bike system that integrates with the MAHLE X35+ Trio Can V2, depending on the overall system's capabilities.

Check that the wired connection to the e-bike system is secure and undamaged. Ensure the y-adapter wire is properly connected. Verify that the e-bike system is powered on and the MAHLE unit is recognized.

Confirm that the e-bike system is operational and not in an error state. Check the communication link between the remote and the e-bike's motor controller. Reboot the e-bike system.

Ensure the bike is stationary and the walk assist function is selected correctly on the remote. Check that the e-bike system supports and has enabled the walk assist feature.

Verify that the external device is in pairing mode and compatible with ANT+ or CAN BUS. Ensure the MAHLE X35+ Trio Can V2 system is active and broadcasting. Consult the manuals for both the MAHLE system and the external device.