Sealey Cross Beam Extendable Single Ram Adaptor - 11-15 Tonne

This adaptor is designed for use with 11-15 tonne capacity trolley jacks and is intended for supporting heavy axles. Always refer to the trolley jack's specifications for the maximum lifting capacity.

This adaptor is compatible with Sealey trolley jacks Model No. VPJ15M-1S and VPJ15S-1S.

The beam is extendable and can be adjusted by pulling or pushing the telescopic sections to the desired length between 925mm and 1500mm. Ensure it is locked securely at the chosen setting before applying load.

The dual lifting positions divide the load over two points on the axle, providing increased safety, stability, and a more balanced support during differential work compared to a single point of contact.

The adaptor increases the minimum height by 94mm, providing crucial extra clearance for working on differentials.

The product comes with a 3 Year guarantee from the manufacturer.

No, this adaptor is specifically designed to mount onto the ram of compatible Sealey trolley jacks (VPJ15M-1S and VPJ15S-1S) and is not intended for use with standard axle stands.

Adjust the extendable arms to ensure they are firmly seated on a stable part of the axle housing. Verify you are using the correct adaptor for the axle width and type.

Ensure the beam is clean and free from debris. Lubricate the extension mechanism lightly if necessary, following manufacturer guidelines for lubricants.

Clean the affected area and apply a suitable metal primer followed by a corrosion-resistant paint compatible with automotive tools. Store the unit in a dry environment.

Double-check that the adaptor is correctly attached to the trolley jack and that the jack is properly positioned. Ensure the load is balanced across both lifting points and that the axle is suitable for this type of support.