Abracs Tile & Porcelain Cutting Diamond Blade - 250mm X 1.8mm X 30-25.4mm

This blade is designed for cutting tiles, ceramic, porcelain, and slate. It features X-Tech Cutting technology optimized for porcelain.

The blade has an arbor size of 30mm, with a supplied adapter to fit a 25.4mm spindle.

Clean the blade after each use with a dry brush or compressed air. Store it in a dry location and inspect regularly for wear or damage. Avoid forcing the blade during cuts.

Yes, provided your angle grinder accepts a 250mm blade and has a compatible arbor size (30mm or 25.4mm).

The segment height is 10mm. This provides sufficient depth for cutting through thicker tiles and dense materials, contributing to the blade's longevity and cutting capability.

While the blade can be used with water cooling systems found on tile saws, avoid submerging the blade or storing it wet. Ensure it is dried thoroughly after use if wet cutting is employed.

X-Tech Cutting technology is Abracs' proprietary design for diamond blades that specifically enhances performance when cutting hard materials like porcelain, offering a cleaner cut and increased efficiency.

Check if the blade is dull or damaged. Ensure you are using the correct cutting speed for the material. Verify the blade is mounted correctly and the tool is running at optimal RPM. Slow down your cutting pass for better control.

Ensure the blade is securely fastened to the tool and that the arbor size matches the tool's spindle. Check for any damage to the blade or the tool's mounting flange. Verify the blade is not warped.

Make sure the blade is balanced and not damaged. Check that the tool's motor and bearings are in good condition. Apply steady, even pressure while cutting.

Ensure you are not forcing the blade through the material. Allow the blade to do the work. Avoid cutting materials the blade is not designed for. Keep the blade clean and free of debris buildup.