Best current price£50.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£50.99Visit shop B&Q - Dovetail Jig12 In WidthDove Tailing Router Jigs With Router Bit & Half-Inch TemplateAlignment Dove Tail Jig
Visit shop2 offers from £50.99 - £53.99
View price history by clicking the chart icon.
The VEVOR 12-Inch Dovetail Jig is an essential tool for intermediate woodworkers and furniture makers who need to achieve professional-grade half-blind dovetail joints with high precision. This jig simplifies complex joinery by providing a stable, aligned template, though users should note it is specifically calibrated for a 12-inch processing width and requires a compatible router setup to function correctly.
| Model Part Number | 28104-1 |
|---|---|
| Brand | Vevor |
No, this specific model is designed for half-blind dovetail joints, commonly used for drawer construction.
The kit includes a 1/2-inch router bit specifically sized for the jig's template.
The jig accommodates a maximum top clamping thickness of 40 mm and a maximum side clamping thickness of 36 mm.
The jig has a fixed processing width of 12 inches (310 mm), so it cannot process boards wider than this in a single pass.
You will need a compatible handheld router, safety gear (glasses and hearing protection), and scrap wood for testing your settings.
Adjust the depth of the router bit slightly. Even a fraction of a millimeter change in depth significantly impacts the fit of a dovetail joint.
Ensure your router bit is sharp, take lighter passes, or use a sacrificial backing board to support the wood fibers during the cut.
Check the clamping pressure on the side and top knobs; ensure the wood surfaces are clean and free of sawdust that might reduce friction.
To set up the jig, align your workpiece against the stop guides to ensure the boards are perfectly square. Ensure your router is equipped with a guide bushing that matches the template requirements. For care and maintenance, keep the moving parts free of wood dust and resin buildup. Periodically wipe the frame with a dry cloth or use compressed air to clear debris from the clamping mechanisms. Storing the unit in a dry, climate-controlled area will prevent any potential rust development, maintaining the precision of the metal components over time.
