Best current price£7.69from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£7.69Visit shop Loops 8 X 460Mm Hardened Auger Wood Drill Bit - Hexagonal Shank - Woodwork Timber
Visit shop
B&Q£9.19Visit shop - Premium 8 X 460mm Hardened Auger Wood Drill Bit With Hexagonal Shank For Woodworking
Visit shop4 offers from £7.69 - £9.19
View price history by clicking the chart icon.
The Loops Hardened Auger Wood Drill Bit is an essential tool for professional carpenters and serious DIY enthusiasts who require deep, precise holes in timber. Featuring an 8mm diameter and a 460mm length, it offers the reach and torque necessary for complex woodworking, though users should note that the long profile requires careful handling to avoid bending during deep boring.
| Model Part Number | 5056524262184 |
|---|---|
| Brand | Loops |
No, this bit is designed exclusively for timber and wood-based materials.
Yes, provided the drill chuck can accommodate the hexagonal shank and has enough torque to drive an 8mm auger.
While the hardened steel lasts a long time, sharpening should be done with a small, fine-grit file on the cutting edges by an experienced user.
This specific model has a diameter of 8mm.
Yes, but be aware that longer bits like the 460mm version are harder to control at steep angles and may bend if side-loaded.
Stop the drill immediately, reverse it slowly to back the bit out, and clear wood chips from the hole before continuing.
Ensure the drill is held perpendicular to the surface at the start, and use a guide or level to maintain the angle while boring.
Pull the bit out periodically to clear dust and allow the motor to cool down; do not force the drill.
To set up, insert the hexagonal shank fully into your drill chuck and tighten firmly to ensure no wobble occurs. This bit is compatible with most standard power drills that accept a 1/4 inch or larger hex-drive chuck. For care, always store the bit in the provided plastic wallet after use to prevent corrosion and protect the cutting edges. Periodically wipe the bit with a light machine oil if working in humid conditions, and avoid dropping the bit, as the long length is susceptible to permanent deformation if it strikes a hard surface at an angle.
