Shopping.co.uk

Blackbird Retro Graphics Kit - Multicolor

Blackbird Retro Graphics Kit - Multicolor

The Blackbird Retro Graphics Kit is a high-quality sticker set designed for the Honda CRF250F 2022...

Best current price£133.49from GhostBikes.com

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular
GhostBikes.com£133.49Visit shop

Blackbird Red/White/Yellow 2148Aa - Retro Graphics Kit For Honda Crf250f 2022-2023

Visit shop

One Offer

1 offer from £133.49

View price history by clicking the chart icon.

GhostBikes.comBlackbird Red/White/Yellow 2148Aa - Retro Graphics Kit For Honda Crf250f 2022-2023
Free delivery in 1–3 days
£133.49
Visit shop

Product Information

Full details

The Blackbird Retro Graphics Kit is designed for Honda CRF250F owners (2022-2023) looking to customize their bike with a high-durability aesthetic upgrade. This comprehensive set provides a full-body transformation for your motorcycle, utilizing heavy-duty 0.5mm crystall material engineered to withstand the rigors of off-road riding, though the installation process requires patience and precision to ensure a bubble-free, long-lasting finish.

All features

ColourMulticolor
Model Part Number43026691
BrandBlackbird

Extended Product Information

FAQs

Does this kit fit older CRF250F models?

No, this kit is specifically designed for the geometry of the 2022-2023 Honda CRF250F model years.

Can I use soap and water to help with alignment?

No. The manufacturer specifically advises against using soaps or solvents as they interfere with the off-road grade adhesive.

Is the material waterproof?

Yes, the 0.5mm crystall material and the ink system are fully waterproof and intended for off-road/enduro use.

Do I need a heat gun?

A standard hairdryer is usually sufficient, but a heat gun on a very low setting can also be used if handled with extreme care to avoid melting the vinyl.

How long should I wait before washing the bike after installation?

It is recommended to wait at least 24 hours to allow the adhesive to fully cure to the plastic surfaces.

Troubleshooting

Graphics not sticking to the plastic curves

The plastic was likely not warm enough during installation. Use a hairdryer to heat the graphic again and press firmly to contour it to the plastic.

Air bubbles trapped under the decal

Carefully poke a small hole in the center of the bubble with a thin needle, then use a hairdryer and soft cloth to press the air out through the hole.

Edge lifting after riding

This is often due to surface contamination. Clean the area thoroughly with a wax-free cleaner, apply heat, and use pressure to re-adhere the edge.

Pros and Cons

Pros

  • Complete aesthetic overhaul in one package
  • Heavy-duty thickness protects body plastics
  • Fade-resistant inks ensure long-term visual appeal
  • Strong adhesion specifically for dirt bike environments

Cons

  • Requires careful heat application for best results
  • Does not include plastics, only graphic decals
  • Installation requires surface preparation and time

Setup, Compatibility & Care

Compatibility: This kit is precision-engineered specifically for the 2022-2023 Honda CRF250F. Ensure your plastics are clean and completely free of oil, wax, or previous residue before starting.

Installation Steps:

  1. Thoroughly degrease all plastic surfaces using a non-residue cleaner.
  2. Peel back a small section of the backing and align the graphic carefully.
  3. Use a hairdryer or heat gun on a low setting to warm the vinyl; this makes the material pliable and ensures the adhesive bonds tightly to curved surfaces.
  4. Apply firm, even pressure from the center of the decal outward to push out air bubbles.
  5. Allow the bike to sit for 24 hours in a warm environment to let the adhesive reach full strength.

Care: Do not use harsh solvents or chemical degreasers when cleaning your bike, as these can weaken the adhesive over time.

Price History

DatePrice
Visit shop