Best current price£144.49from B&Q
Shopping.co.uk recommended and popular offers
B&Q£144.49Visit shop B&Q - 5W30 Fully Synthetic Engine Oil Api Sn Acea C3 Mb 229.31/229.51 Ll-04 Dexos 2 4X5L
Visit shop3 offers from £144.49 - £144.99
View price history by clicking the chart icon.
The Atlantic 5W30 Fully Synthetic Engine Oil is designed for modern gasoline and diesel engines, particularly those meeting Euro V and Euro VI standards and equipped with after-treatment systems like SCR, EGR, and DPFs. Its primary benefit is maximum engine performance and superior lubrication, reducing deposits and sustaining power even under demanding conditions. A key consideration is to always verify your vehicle's owner's manual for the specific SAE 5W-30 ACEA C2/C3 lubricant recommendation before use.
| Model Part Number | A-664414x4 |
|---|---|
| Brand | Atlantic |
API SN/CF denotes performance standards for gasoline (SN) and diesel (CF) engines. ACEA C3 is a European standard for engine oils with low SAPS (Sulfated Ash, Phosphorus, Sulfur), designed for modern emission systems.
While it can be used if your manual specifies ACEA C3 5W-30, its low SAPS formulation is primarily optimized for modern engines with DPFs. Check your owner's manual for the most appropriate oil.
It is generally recommended not to mix different types of engine oil, especially fully synthetic with conventional, as it can compromise the performance benefits of the synthetic oil. Always refer to your owner's manual for specific recommendations.
This 'low SAPS' formulation is crucial for protecting emission control devices such as Diesel Particulate Filters (DPF) and Selective Catalytic Reduction (SCR) systems from clogging and premature failure.
Follow the oil change intervals recommended in your vehicle's owner's manual. Modern synthetics often allow for extended drain intervals, but this varies by manufacturer and driving conditions.
Yes, fully synthetic oils like this one can improve engine efficiency by reducing friction, which may contribute to better fuel economy compared to conventional oils.
These are specific performance standards set by Mercedes-Benz (MB 229.31/229.51) and General Motors (Dexos 2) for engine oils. If your vehicle requires one of these approvals, this oil is certified to meet those requirements.
Verify the oil level is correct. If the level is adequate, the issue may be with the sensor or oil pressure. Consult a qualified mechanic.
Ensure the correct oil specification is used and that oil change intervals are adhered to. Extreme operating conditions may require more frequent changes. Check for cooling system issues.
Check the oil level and condition. Low or degraded oil can cause increased valvetrain noise. If the noise persists, have the engine inspected by a professional.
Compatibility Verification: Before use, always consult your vehicle's owner's manual. Confirm that the recommended oil specification is SAE 5W-30 and meets the ACEA C2 or C3 standard, along with any manufacturer-specific approvals such as MB 229.31/229.51 or GM dexos2, if applicable. This oil is specifically designed for modern engines, particularly those with exhaust after-treatment systems.
Oil Change Procedure: Follow the standard oil and filter change procedure as outlined in your vehicle's manual. Ensure proper disposal of used engine oil and filter according to local regulations.
Storage: Store the oil containers in a clean, dry place, away from direct sunlight and extreme temperatures. Keep containers tightly sealed when not in use.
Maintenance: Regular oil level checks are recommended between scheduled oil changes. Maintain a consistent oil change schedule based on your vehicle manufacturer's recommendations to ensure optimal performance and longevity.
