6-way splitter in a zinc-cast housing with F-connectors to split a TV signal.
Best current price£10.79from B&Q
Shopping.co.uk recommended and popular offers
B&Q£10.79Visit shop B&Q - Catv Splitter Unit Cable Tv Catv Ntl Virgin Media 10 Db / 5-1000 Mhz 1 In 6 Outputs
Visit shop2 offers from £10.79 - £67.99
View price history by clicking the chart icon.
The Nedis SSPL600ME is a 6-way CATV F-splitter designed for users needing to distribute a TV signal to multiple devices. Its primary benefit is efficiently splitting a single coaxial input into six separate outputs, all housed within a durable zinc-cast casing. A potential caveat is the signal loss (up to 10 dB gain) inherent in splitting, which may require an amplifier in certain setups. Key features include its 5-1000 MHz frequency range and F-type connectors for broad compatibility.
| Model Part Number | SSPL600ME |
|---|---|
| Brand | Nedis |
The SSPL600ME is used to divide a single coaxial cable television signal into six separate signals, allowing you to connect up to six devices to one main signal source.
It uses standard F-type connectors, which are common for coaxial cable connections in TV and satellite systems.
Yes, splitting a signal inherently reduces its strength (attenuation). This splitter has a maximum of 10 dB gain, meaning each output signal is significantly weaker than the input. For long cable runs or weak initial signals, an amplifier might be necessary.
While some modems use coaxial connections, this splitter is primarily designed for CATV signals. Using it for broadband internet may result in signal degradation and unreliable performance. Consult your internet provider for compatible splitters.
The SSPL600ME supports a frequency range of 5 - 1000 MHz, which is standard for most cable television services.
You can connect up to six devices (e.g., televisions, set-top boxes) to the six output ports of this splitter.
Not always. If your original signal is very strong and your devices are close to the splitter, you might not need an amplifier. However, if you experience reception issues, a signal amplifier placed after the splitter is recommended.
Check all F-connector connections are secure. Verify the input cable is properly connected. Consider using a signal amplifier if the total signal loss across the split is too high for your devices.
Ensure all connections are tight. Check the integrity of the coaxial cables for damage. Make sure the splitter is not placed near sources of strong electromagnetic interference.
If an F-connector is damaged, the affected port may become unusable. Inspect the connector for bent pins or stripped threads. If damaged, consider replacing the splitter if repair is not feasible.
Setup:
Compatibility:
Care:
