Universal Oven Cooker Gas Supply Hose - 4ft - 1/2 Inch - Straight Bayonet

This hose is designed for standard domestic gas supply. Please confirm compatibility with your specific gas type (natural gas or LPG) and local regulations.

The product description specifies this is a 4ft (approximately 1.2 meters) hose.

While the kit provides components, gas appliance installation can be complex and potentially dangerous if done incorrectly. It is highly recommended to have a qualified gas engineer install or check the installation for safety and compliance with local regulations.

The angled pipe joint allows for a connection when the wall gas outlet and the appliance inlet are not perfectly aligned, providing flexibility in positioning the appliance or hose.

Most domestic gas ovens and cookers use a 1/2 inch gas connection. If unsure, consult your appliance's manual or a gas engineer.

The gas safety chain is a safety feature designed to prevent the appliance from tipping over by tethering it to a secure point, protecting the gas hose from strain.

Immediately turn off the gas supply at the mains. Check all connections using a soapy water solution. Reapply PTFE tape and tighten fittings if bubbles are present. If the smell persists, do not use the appliance and contact a qualified gas engineer.

Ensure you are using the correct end connector for both the appliance and the wall outlet. Verify that the thread sizes are compatible. Do not force connections; use PTFE tape to aid sealing but not to overcome thread mismatches.

Confirm the main gas supply is turned on. Check that the bayonet connectors are fully engaged. Ensure there are no kinks or blockages in the hose. Verify that the appliance's own gas valve is open.