Best current price£7.09from Demon Tweeks
Shopping.co.uk recommended and popular offers
Demon Tweeks£7.09Visit shop OMP 90 Degree Fire Extinguisher Nozzle Connector - 6mm
Visit shop3 offers from £7.09 - £12.16
View price history by clicking the chart icon.
This OMP 90-degree nozzle connector is for users needing to replace or repair parts of their OMP fire extinguisher system, specifically the Platinum series. It offers a direct replacement for damaged or missing original equipment, ensuring a secure fit and proper nozzle angle for effective fire suppression. A key benefit is its simple push-fit hose connection and screw-in nozzle attachment. However, it's important to note that this specific model is designed only for fire extinguishers using black coated hose with a 6mm outer diameter.
| Model Part Number | CD0-0391-A03 |
|---|---|
| Brand | OMP |
No, this connector is specifically designed for OMP fire extinguisher systems using black coated hoses with a 6mm outer diameter.
No, this connector is only compatible with 6mm outer diameter hoses. Using a different size may result in a poor seal or failure.
The '90 degree' indicates the angle of the connector between the hose inlet and the nozzle outlet, which helps direct the extinguishing agent effectively.
This connector is Option 1, as supplied with OMP Platinum series extinguishers, and is designed for 6mm OD black coated hoses. If your extinguisher matches this description, it is likely compatible.
A 90-degree connector allows for better maneuverability and aiming of the extinguishing agent in tight or confined spaces, common in automotive applications.
No, installation typically requires no special tools. The hose connects via a push-fit mechanism, and the nozzle screws on by hand.
Ensure the hose is clean, free of debris, and has the correct 6mm outer diameter. Verify that the hose is pushed in completely until it seats firmly. If the hose is old or damaged, it may need replacement.
Check that you are using the correct OMP nozzle designed for this connector. Ensure the threads on both the connector and the nozzle are clean and undamaged. Do not force the nozzle; if it resists, re-align and try again.
Remove and re-seat the hose, ensuring it is fully inserted. Inspect the hose end and the connector's push-fit mechanism for any obstructions or damage. If the problem persists, the hose may be compromised and require replacement.
Setup:
Compatibility:
Care:
