Muriva Stone Loft Brick Effect Wallpaper - White

Use a high-quality wallpaper paste specifically formulated for paper-backed or standard wallpapers. Follow the paste manufacturer's instructions for mixing and application.

While it is wet removable, this paper-based wallpaper is not designed for high-moisture environments like bathrooms or kitchens where steam is common. It is best suited for living areas and bedrooms.

For general cleaning, use a dry, soft cloth. For minor marks, a barely damp cloth can be used gently, but avoid excessive moisture or scrubbing.

This means that the pattern on each subsequent strip should be offset by half the pattern's width, or staggered, to create a continuous visual flow across the wall.

Walls must be clean, dry, smooth, and sound. Remove old wallpaper, fill cracks, and sand smooth. If painting, ensure the paint is fully dry and non-flaking.

No, this is a paper-based wallpaper and is not considered washable. It is suitable for dry wiping only.

Each roll measures 53cm in width and 10m in length.

Gently lift the affected area and reapply paste, smoothing outwards. For small bubbles, a pinhole can allow air to escape.

Ensure the 'half drop' is maintained between strips. Check that the first strip was hung perfectly vertical. Adjust the alignment of the next strip carefully before smoothing.

Ensure the wallpaper was originally applied according to instructions. Use a steamer or a dedicated wallpaper remover solution to soften the paste, then scrape gently.

Wipe away excess paste immediately with a clean, damp sponge or cloth before it dries. Avoid spreading paste onto the printed surface.