Best current price£13.97from B&Q
Shopping.co.uk recommended and popular offers
B&Q£13.97Visit shop B&Q - 12V Fuel Water Diesel Transfer Pump/filter Submersible Portable Clip On Battery
Visit shop1 offer from £13.97
View price history by clicking the chart icon.
This 51mm DC 12V fuel transfer pump from GEAR4GARAGE is designed for efficient transfer of diesel, coal oil, and water. It's ideal for refueling applications where a portable and reliable pump is needed, offering a flow rate of 30L/min. A key caveat is that it's designed for 12V DC power only and is not suitable for gasoline.
| Model Part Number | 51mm |
|---|---|
| Brand | Gear4Garage |
This pump is suitable for diesel, coal oil, and water. It is not designed for gasoline or other highly flammable liquids.
The pump requires a DC 12V power source and draws approximately 4 Amps.
The frequency of cleaning depends on the fluid being transferred. For best performance, check the filter for debris after each use and clean or replace it as needed, especially if transferring dirty fluids.
While the pump is designed for efficient transfer, continuous operation without breaks is not recommended to prevent motor overheating. Allow for cooling periods during extended use.
The pump has a head of 3 meters, meaning it can lift fluids up to approximately 3 meters vertically.
The product description does not specify if hoses are included. Ensure you have compatible hoses with a 19mm outer diameter for the outlet.
While it can transfer oil, ensure it is suitable for the type of engine oil and that the oil is not excessively hot. It is primarily designed for diesel and similar fuels.
Verify the 12V DC power connection is secure and the polarity is correct. Check that the power source is active and providing sufficient power (at least 4A).
Ensure the pump inlet is fully submerged in the fluid. Check the filter for blockages and clean or replace it. Verify that the outlet hose is not kinked or obstructed. Check for air leaks in the inlet hose connection.
The pump may not be properly primed. Try submerging the inlet deeper or tipping the pump slightly to help it draw fluid. Ensure there are no blockages in the inlet or outlet.
Ensure the pump is not run dry for extended periods. Check for any obstructions causing the motor to strain. Allow the pump to cool down before resuming use.
Setup: Connect the pump to a 12V DC power source, ensuring correct polarity (+/-). Attach appropriate hoses to the 19mm outlet and the inlet. Submerge the inlet into the fluid source. The pump is self-priming, but initial submersion helps accelerate the process. Ensure the filter is securely attached to the inlet.
Compatibility: This pump is designed for diesel, coal oil, and water. Do not use with gasoline or other highly flammable or volatile liquids due to safety risks. It operates on 12V DC power. Ensure your power source can supply at least 4 Amps.
Care: After each use, it is recommended to flush the pump with clean water to remove any residual fluid, especially if transferring diesel or oil. Store the pump in a dry, clean location. Periodically check the filter for debris and clean or replace it as needed. Inspect the power cord and hose connections for wear.
