Plumbsure Tap Connector - Bq28620174
Best current price£7.74from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£7.74Visit shop B&Q - Tap Connector Bq28620174 1 Solder Ring 15mm
Visit shopB&Q£7.74Visit shop One Offer
1 offer from £7.74
View price history by clicking the chart icon.
Product Information
Full details
The Plumbsure Tap Connector (BQ28620174) is designed for plumbers and DIY enthusiasts seeking a durable and cost-effective plumbing solution. Its key benefit lies in the integrated lead-free solder ring, simplifying joint creation. A caveat to be aware of is the necessity for proper copper pipe preparation with a cleaner and flux before soldering.
All features
| Model Part Number | Bq28620174 |
|---|---|
| Brand | Plumbsure |
Extended Product Information
FAQs
What type of solder is used in the fitting?
The fitting uses a high-quality, lead-free solder.
Do I need to use flux with this connector?
Yes, copper piping must be prepared with a pipe cleaner and flux prior to soldering for a reliable joint.
What tools are required for installation?
You will need a blow torch, a pipe cleaner, and flux.
Can this connector be used with plastic pipes?
This connector is designed for copper piping. Use of adapters would be necessary for plastic pipes, which is not covered by the product's intended use.
How long does it take for the solder to melt?
The time required for the solder to melt depends on the heat output of the blow torch and the size of the fitting, but it is typically a quick process once adequate heat is applied.
Is this product suitable for high-pressure systems?
When installed correctly, it forms a secure joint suitable for standard domestic plumbing pressures.
Troubleshooting
Joint is leaking after installation
Ensure the copper pipe was thoroughly cleaned and fluxed before insertion. Reheat the joint evenly, ensuring the solder flows completely around the pipe. Check for any physical damage to the fitting or pipe.
Solder is not melting or flowing
Verify that the blow torch is providing sufficient heat and is applied evenly to the fitting. Ensure the pipe is fully inserted into the fitting. Check that the correct type of blow torch fuel is being used.
Fitting is difficult to slide onto the pipe
Confirm that the copper pipe is not deformed and is the correct diameter for the fitting. Ensure the end of the pipe is free of burrs or excess flux residue.
Pros and Cons
Pros
- Simplifies soldering process with integrated solder
- Durable and cost-effective plumbing solution
- Reliable and secure joint formation
- Lead-free solder for safer installations
- Precision manufacturing ensures consistent results
Cons
- Requires copper pipe preparation (cleaning and flux)
- Requires a blow torch for installation
- Not suitable for non-copper piping without adapters
Setup, Compatibility & Care
Setup:
- Ensure the copper pipe is clean and free from oxidation using a pipe cleaner.
- Apply a thin, even layer of flux to the end of the copper pipe.
- Insert the prepared copper pipe fully into the Plumbsure Tap Connector.
- Heat the fitting evenly with a blow torch until the internal solder ring melts and flows.
- Allow the joint to cool completely without disturbing it.
Compatibility:
- Primarily designed for use with standard copper piping.
- Requires a blow torch for installation.
Care:
- No specific ongoing care is required once installed. Regular plumbing system checks are recommended.