Craft Resin Crystal Clear Epoxy Resin Kit - 16L

Yes, Craft Resin is certified food-safe once it has fully cured, making it suitable for items like serving trays and coasters.

While it is UV-resistant, it is intended primarily for indoor use. Direct, prolonged exposure to intense sunlight may still degrade the finish over many years.

The working time (pot life) is typically around 40-45 minutes, depending on the ambient temperature.

Yes, it is highly compatible with most resin-specific pigments, dyes, inks, and glitters.

Wash the area immediately with plenty of soap and water. Avoid using solvents on your skin.

The kit includes the resin and hardener, a reusable mixing stick, gloves, and an instruction manual. You may need your own measuring cups and mixing containers depending on the project size.

Ensure the temperature was not too low during the cure. If it is tacky, you may need to wait an additional 12-24 hours or apply a new, properly measured thin coat once it is firm enough.

Stir more slowly to avoid introducing air. Use a heat gun or torch carefully after pouring to release air bubbles before the resin begins to set.

This is often caused by improper mixing or extreme humidity. Always ensure you scrape the sides of the mixing vessel and work in a dry environment.