D-C-Fix Plain Glossy Taupe Self Adhesive Vinyl Wrap Film - 45cm x 10m
Dc fix sticky back plastic designs are so authentic, you will hardly believe its a vinyl film. Rej...Dc fix sticky back plastic designs are so authentic, you will hardly believe its a vinyl film. Rejuvenate a worktop or wrap kitchen doors in minutes, customise furniture like drawer fronts or wardrobe doors. This vinyl can save you thousands on buying new, simply cover what you have. Dc fix is a non-permanent DIY solution, perfect for tenants or landlords looking for a quick fix, the vinyl can be removed fairly easy, use a hairdryer to warm the vinyl first and peel back, any leftover residue can be removed using warm soapy water. Dc fix has a water based low tack adhesive, this allows the vinyl to be repositioned during application, unlike stronger solvent based adhesives. Simply pull the vinyl back and start again. This vinyl has a 5 star rating for adhesion, lightfastness, shrinkage and durability. High Quality dc fix is our preferred brand of vinyl film due to its 5* rating for adhesion, opacity, lightfastness, shrinkage and durability.
This guide is for anyone looking to refresh their furniture or surfaces quickly and affordably using d-c-fix self-adhesive vinyl. The key benefit is a simple DIY solution that can transform your space in minutes, saving you the cost of replacements. Keep in mind that while it's removable, it's not designed for long-term, heavy-duty use.
All features
Brand
d-c-fix
Extended Product Information
FAQs
What surfaces can I apply d-c-fix to?
It is best applied to smooth, non-porous surfaces like wood, laminate, and metal.
Is the vinyl waterproof?
Yes, it is water-resistant, making it suitable for use in kitchens and bathrooms, but avoid prolonged water exposure.
Can I reposition the vinyl after application?
Yes, due to the water-based adhesive, you can reposition the vinyl during application.
How do I remove the vinyl?
Use a hairdryer to heat the vinyl and soften the adhesive. Then, peel it slowly from the surface.
Will the vinyl damage my existing surface upon removal?
No, it is designed to be removable without causing significant damage, especially if the surface is properly prepared.
Can I use this vinyl on floors?
While it can be used on floors, it is not recommended for high-traffic areas. Consider the wear and tear.
How do I clean the vinyl?
Use a damp cloth and mild soap. Avoid abrasive cleaners.
What is the lifespan of the vinyl?
The lifespan depends on usage and care, but typically it can last for several years with proper care.
Troubleshooting
Air bubbles under the film.
Lift the film and reapply, smoothing out bubbles with a squeegee. For small bubbles, you can prick them with a pin and smooth them down.
Film not sticking properly.
Ensure the surface is clean, dry, and smooth. Apply heat with a hairdryer to activate the adhesive and press firmly.
Edges peeling up.
Trim the edges neatly and apply heat with a hairdryer to seal them. Use a seam roller for extra adhesion.
Difficulty removing the film.
Use a hairdryer to warm the vinyl and soften the adhesive before peeling slowly.
Pros and Cons
Pros
Cost-effective alternative to replacing furniture.
Quick and easy application process.
Repositionable adhesive allows for error correction.
Wide range of designs available.
Durable and long-lasting finish.
Easy removal without causing significant damage to the underlying surface.
Cons
Not suitable for extremely high-wear areas.
Surface preparation is key for optimal adhesion.
Removal may require a hairdryer.
May not perfectly match existing surfaces.
Edges can be prone to peeling if not applied correctly.
Limited to smooth, non-porous surfaces.
Setup, Compatibility & Care
Surface Preparation: Clean the surface thoroughly with a degreasing cleaner. Ensure it's dry and smooth.
Cutting: Measure the surface and cut the vinyl film slightly larger.
Application: Peel back a small section of the backing and apply the adhesive side to the surface. Use a squeegee to smooth out air bubbles as you go. For edges, wrap the film around.
Compatibility: This vinyl is best used on smooth, non-porous surfaces such as wood, laminate, and metal.
Care: Clean with a damp cloth and mild soap. Avoid abrasive cleaners or excessive scrubbing. Protect from extreme heat and direct sunlight to prolong its life.