Setup, Compatibility & Care
Setup:
- Ensure the EazyPod is placed on a stable, level base. Allow adequate space around the unit for maintenance access.
- Connect your pond pump to the inlet fitting of the EazyPod. For gravity-fed systems, connect the outlet of your pond to the inlet.
- Connect the outlet of the EazyPod to your return pipework or waterfall.
- Ensure the EazyPod does not exceed its maximum recommended flow rate to maintain optimal performance.
Compatibility:
- Suitable for garden ponds up to 20,000 litres.
- Suitable for Koi ponds up to 10,000 litres.
- Compatible with both pump-fed and gravity-fed systems.
- Can be used as a pre-filter or in quarantine systems.
- Requires an air pump (not included) for the cleaning cycle.
Care:
Regular cleaning is essential to maintain filter efficiency.
- Turn off the pond pump.
- Connect an air pump (sold separately) to the air inlet on the EazyPod lid.
- Turn on the air pump. This will cause the K1 Micro media to tumble and agitate, releasing trapped waste.
- After a few minutes of agitation, turn off the air pump and open the waste outlet valve or ball valve on the EazyPod to flush out the accumulated debris. Repeat the air agitation and flushing process if necessary until the water runs clear.
- Turn the pond pump back on.