Unger Rinse 'n' Go Pure Water Cleaning System
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Unger Rinse 'n' Go Pure Water Cleaning System is designed for both professionals and homeowners seeking a streak-free clean for windows, vehicles, and various outdoor surfaces. Its key benefit lies in its ability to convert tap water into pure water, eliminating the need for chemicals. However, users should note that the system requires periodic resin replacement to maintain optimal performance.
All features
| Brand | Unger |
|---|
Extended Product Information
FAQs
How long does the filter resin last?
The lifespan of the resin depends on the water quality in your area and how frequently you use the system. Monitor the TDS meter for the most accurate indication of when to replace the resin.
Can I use this system with hot water?
It is recommended to use cold water only with this system. Using hot water may damage the filter resin.
What surfaces can I safely clean with this system?
The system is safe for windows, glass facades, conservatories, vehicles, and various outdoor surfaces like soffits and guttering.
How do I store the system?
Store the system in a dry place away from direct sunlight when not in use. Drain the water from the hose and brush before storage to prevent freezing damage in cold weather.
Where can I purchase replacement filter resin?
Replacement resin can be purchased from various retailers that carry Unger products or online.
How do I clean the brush head?
Rinse the brush head thoroughly with clean water after each use. You may use a mild detergent if needed, but rinse it thoroughly to avoid leaving any residue.
What is the purpose of the TDS meter?
The TDS meter measures the total dissolved solids in the water, indicating the water's purity. This helps you determine when the filter resin needs replacing to ensure spot-free cleaning.
Troubleshooting
Water spots or streaks are appearing after cleaning.
Check the TDS meter reading. If it's too high, the resin needs to be replaced. Ensure proper water pressure.
Low water pressure from the brush.
Check for kinks in the hose and ensure the water source is fully on. Clean the brush head if necessary.
The telescopic pole won't extend fully.
Check for any obstructions or debris in the pole sections. Loosen the locking mechanism and try again.
Pros and Cons
Pros
- Provides streak-free cleaning results.
- Eliminates the need for cleaning chemicals.
- Includes a telescopic pole for easy reach.
- Suitable for various surfaces including windows, vehicles, and more.
- Easy to set up and use.
Cons
- Requires periodic replacement of the filter resin.
- May not be ideal for very large cleaning areas without additional resin.
- The initial investment cost may be higher than traditional cleaning methods.
- Requires a water source and access to a garden hose.
Setup, Compatibility & Care
- Assembly: Attach the water-fed brush to the telescopic pole. Connect the hose to both the filter unit and the brush.
- Water Source: Connect the filter unit to a standard garden hose.
- Resin: Ensure the filter unit contains the filter resin. Replace when the TDS meter indicates the water is no longer pure.
- TDS Meter: The included TDS (Total Dissolved Solids) meter helps monitor the purity of the water. This is crucial for achieving a spot-free finish.
- Care: Rinse the brush after each use. Store the system in a dry place. Replace the filter resin as needed, based on usage and water quality.