Best current price£104.99from Leisure Lakes Bikes
Shopping.co.uk recommended and popular offers
Leisure Lakes Bikes£104.99Visit shop Wheels Manufacturing PressFit 30 Bottom Bracket Black
Visit shop2 offers from £104.99
View price history by clicking the chart icon.
The Wheels Manufacturing PressFit 30 Bottom Bracket is designed for performance-minded cyclists and mechanics seeking a high-quality, durable upgrade to their bike's drivetrain interface. By utilizing a precision-machined aluminum shell, this component excels at maintaining accurate bearing alignment and eliminating the persistent creaking often associated with standard plastic bottom bracket housings. While it offers superior load capacity and durability, users should be aware that proper installation requires a specific press-fit tool kit to ensure the frame and bearings are not damaged during assembly.
| Model Part Number | WMPF30BB |
|---|---|
| Brand | Wheels Manufacturing |
Yes, this unit is a direct replacement for standard PressFit 30 systems, including those used by SRAM and FSA.
Yes, a standard press-fit installation tool is required to ensure the cups are installed square and without damage.
Yes, the Enduro ABEC-3 bearings are serviceable and can be replaced if they wear out over time.
These spacers are used to fine-tune the fitment of your crank spindle, ensuring there is no side-to-side play after assembly.
No, this is specifically for PressFit 30 shells. BB30 and PF30 have different shell diameters and installation methods.
Service intervals depend on riding conditions; however, checking for smooth rotation and lack of grit every 2,000 miles is recommended.
Verify that the aluminum shell is seated fully against the frame and check that the silicone seals are correctly positioned.
Re-evaluate the use of the included 0.5mm and 1.0mm spacers to ensure there is no gap between the crank spindle and the bearing covers.
Ensure the bottom bracket shell is clean, free of burrs, and that you are using a dedicated press-fit tool that applies even pressure.
To install, ensure your bike frame shell is clean and free of old grease or debris. Apply a light layer of high-quality bike grease to the contact surfaces. Using a proper press-fit bottom bracket tool, slowly and evenly press the cups into the frame. Ensure the included 0.5mm or 1.0mm spacers are used correctly between the crank arm and the bearing seal to prevent lateral play in the spindle. For maintenance, periodically wipe the exterior of the silicone dust seals and check for any play in the crank arms. If bearings eventually feel gritty, they can be serviced or replaced using standard shop practices for ABEC-3 bearings.
