Best current price£6.99from My Motor World
Shopping.co.uk recommended and popular offers
My Motor World£6.99Visit shop Hycote Black Kia Phantom Double Acrylic Spray Paint 150Ml
Visit shop5 offers from £6.99 - £50.99
View price history by clicking the chart icon.
Designed for automotive enthusiasts and DIY vehicle owners, the Hycote Double Acrylic Paint in Phantom Black (Paint Code: MZH) is ideal for localized touch-ups and panel repairs on KIA vehicles. Its primary benefit is the compressed aerosol technology, which offers double the coverage of standard sprays due to a higher paint-to-propellant ratio. While highly durable and fade-resistant, users should note that the 150ml container is best suited for small to medium repair areas rather than full vehicle resprays.
| Colour | Black |
|---|---|
| Model Part Number | XDKA108 |
| Brand | Hycote |
| Container Volume | 150ml |
This paint is specifically colour-matched to KIA Phantom Black, paint code MZH.
Yes, this paint is compatible with plastic surfaces, provided the surface is cleaned and properly prepared with a suitable plastic primer.
For best results, apply multiple thin coats rather than one thick layer, allowing drying time between each.
While the paint is durable on its own, applying a clear coat can add extra depth and protection to the finish.
The formula is fast-drying, typically touch-dry within 15-30 minutes, though full curing takes longer.
Yes, it is compatible with existing OEM, acrylic, and cellulosic finishes.
Remove the nozzle and soak in solvent or replace it with a spare. Invert the can and spray briefly to clear the valve after each use.
The coats were applied too heavily or too close to the surface. Apply thinner coats and maintain the recommended spray distance.
Verify the paint code on your vehicle's identification plate matches 'MZH'. Note that sun-faded factory paint may appear different from new touch-up paint.
To ensure professional results, the surface must be clean, dry, and free of oil, grease, or loose debris. For best adhesion, lightly sand the repair area and prime if necessary. Apply the paint in light coats from a distance of approximately 25-30cm, allowing for sufficient drying time between applications according to the instructions on the label. Always store the can in a cool, dry place away from direct sunlight. To prevent the nozzle from clogging, invert the can and spray for a few seconds after the final coat to clear the internal valve.
